Volume 1, Issue 2 (Jan 2004)                   IJMSE 2004, 1(2): 9-15 | Back to browse issues page

XML Print

Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
SAGHI S., DIVANDARI M., KHARAZI Y.H.K.. FLOW BEHAVIOR OF MOLTEN METAL IN ALUMINUM LFC PROCESS. IJMSE 2004; 1 (2) :9-15
URL: http://ijmse.iust.ac.ir/article-1-26-en.html
FLOW BEHAVIOR OF MOLTEN METAL IN ALUMINUM LFC PROCESS
SAGHI S. , DIVANDARI M. , KHARAZI Y.H.K.
Abstract:   (36213 Views)
The effects of gating system and pattern geometry on the metal flow in the lost foam casting (LFC) process have been investigated using glass covered mold and video recording system. Unlike convectional casting process, the type of the gating system showed little effect on fillability in lost foam, but pattern thickness had large effect on mold filling. The mold filling behavior seems to be controlled by the combined influences of heat and mass transfer. The flow rate increased with increasing pattern thickness.
Keywords: Lost foam casting, Aluminum, Fluid flow, Mold filling, Gating system
     
Type of Study: Research Paper | Subject: Ceramics
Add your comments about this article : Your username or Email:
CAPTCHA
Rights and permissions
Creative Commons License This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

© 2022 All Rights Reserved | Iranian Journal of Materials Science and Engineering

Designed & Developed by : Yektaweb