Volume 1, Issue 1 (3-2011)
IJOCE 2011, 1(1): 141-153 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Farkas J. MATHEMATICAL AND TECHNICAL OPTIMA IN THE DESIGN OF WELDED STEEL SHELL STRUCTURES. IJOCE 2011; 1 (1) :141-153
URL: http://ijoce.iust.ac.ir/article-1-12-en.html
URL: http://ijoce.iust.ac.ir/article-1-12-en.html
Abstract: (23443 Views)
In some cases the optimum is the minimum of the objective function (mathematical optimum), but in other cases the optimum is given by a technical constraint (technical optimum). The present paper shows the both types in two problems. The first problem is to find the optimum dimensions of a ring-stiffened circular cylindrical shell subject to external pressure, which minimize the structural cost. The calculation shows that the cost decreases when the shell diameter decreases. The decrease of diameter is limited by a fabrication constraint that the diameter should be minimum 2 m to make it possible the welding and painting inside of the shell. The second problem is to find the optimum dimensions of a cantilever column loaded by compression and bending. The column is constructed as circular or conical unstiffened shell. The cost comparison of both structural versions shows the most economic one.
Keywords: structural optimization, circular and conical cylindrical shells, cost calculation, buckling of plates and shells, economy of welded structures
| Rights and permissions | |
 | This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |
