---

Quadratic programming (QP) is an optimization problem wherein one minimizes (or maximizes) a quadratic function of a finite number of decision variable subject to a finite number of linear inequality and/ or equality constraints. In this paper, a quadratic programming problem (FFQP) is considered in which all cost coefficients, constraints coefficients, and right hand side are characterized by L-R fuzzy numbers. The FFQP problem is converted into the fully fuzzy linear programming using the Taylor series and hence into a linear programming problem which may be solved by applying GAMS Software. Finally, an example is given to illustrate the practically and the efficiency of the method.

---

This study is devoted to discrete sizing optimization of truss structures employing an efficient discrete evolutionary meta-heuristic algorithm which uses the Newton gradient-based method as its updating scheme and it is named here as Newton Meta-heuristic Algorithm (NMA). In order to enable the NMA population-based meta-heuristic to effectively explore the discrete design space, a term containing the best solution found is added to the basic updating rule of the algorithm. The efficiency of the proposed NMA metaheuristic is illustrated by presenting five benchmark discrete truss optimization problems and comparing the results with literature. The numerical results demonstrate that the NMA is a robust and powerful meta-heuristic algorithm for dealing with the discrete sizing optimization problems of steel trusses.

---

Due to the random nature of the variables affecting the analysis and design of structures, the reliability method is considered as one of the most important and widely used topics in structural engineering. Despite the simplicity of moment methods, the answer to problems with multiple design points (the point with the highest probability of failure) such as transmission line towers depends a lot on the starting point of the search; and it may converge to the local optima answer which is not desirable. Simulation methods also require a large number of evaluations of the limit state function and increase the volume and time of calculations. Also, the design point is not calculated in most of these methods. In this study, the reliability index of four transmission line towers was calculated with four metaheuristic algorithms in which the limit state function was defined based on the displacement of nodes and the results were compared with the results of Monte Carlo Simulation (MCS) method. For this purpose, the objective function was defined as the geometric distance between the point on the function of the boundary condition to the origin in the standard normal coordinate system and the constraint of the problem (the limit state function) based on the displacement of the nodes. Random variables in these problems consisting of the cross-sectional area of the members, the modulus of elasticity, and the nodal loads.

---

The present work is aimed at assessing the impact of strong column-weak beam (SCWB) criterion on seismic performance of optimally designed steel moment frames. To this end, different SCWB ratios are considered for steel special moment resisting frame (SMRF) structures and performance-based design optimization process is implemented with the aid of an efficient metaheuristic. The seismic collapse performance of the optimally designed SMRFs is assessed by performing incremental dynamic analysis (IDA) and determining their adjusted collapse margin ratios. Three design examples of 5-, 10-, and 15-story SMRFs are presented to illustrate the efficiency of the proposed methodology.

---

This paper proposes a GA-based reduced search space technique (GA-RSS) for the optimal design of steel moment frames. It tries to reduce the computation time by focusing the search around the boundaries of the constraints, using a ranking-based constraint handling to enhance the efficiency of the algorithm. This attempt to reduce the search space is due to the fact that in most optimization problems the optimal solution lies on or near the boundaries of the feasible region. All the analyses/optimization steps have been implemented in MATLAB and the method has been validated by optimizing three moment-frame benchmark problems. According to the results, the algorithm performs fit and needs relatively fewer analyses than other metaheuristic algorithms to reach a global optimum solution.

---

Nowadays, the optimal design of structures based on reliability has been converted to an active topic in structural engineering. The Reliability-Based Design Optimization (RBDO) methods provide the structural design with lower cost and more safety, simultaneously. In this study, the optimal design based on reliability of dome truss structures with probability constraint of the frequency limitation is discussed. To solve the RBDO problem, nested double-loop method is considered; one of the loops performs the optimization process and the other one assesses the reliability of the structure. The optimization process is implemented using ECBO and EVPS algorithms and the reliability index is calculated using the Monte Carlo simulation method. Finally, the size and shape reliability-based optimization of 52-bar and 120-bar dome trusses has been investigated.

---

Economy and safety are two important components in structural design process and stablishing a balance between them indeed results in improved structural performance specially in large-scale structures including space lattice domes. Topology optimization of geometrically nonlinear single-layer lamella, network, and geodesic lattice domes is implemented using enhanced colliding-bodies optimization algorithm for three different spans and two different dead loading conditions. Collapse reliability index of these optimal designs is evaluated to assess the safety of the structures against overall collapse using Monte-Carlo simulation method. The numerical results of this study indicate that the reliability index of most of the optimally designed nonlinear lattice domes is low and this means that the safety of these structures against overall collapse is questionable.

---

The main purpose of the present work is to investigate the impact of soil-structure interaction on performance-based design optimization of steel moment resisting frame (MRF) structures. To this end, the seismic performance of optimally designed MRFs with rigid supports is compared with that of the optimal designs with a flexible base in the context of performance-based design. Two efficient metaheuristic algorithms, namely center of mass optimization and improved fireworks, are used to implement the optimization task. During the optimization process, nonlinear structural response-history analysis is carried out to evaluate the structural response. Two illustrative design examples of 6- and 12-story steel MRFs are presented, and it is observed that the performance-based design optimization considering soil-structure interaction decreases the structural weight and increases nonlinear structural response in comparison to rigid-based models. Therefore, in order to obtain more realistic optimal designs, soil-structure interaction should be included in the performance-based design optimization process of steel MRFs.

---

Jellyfish Search (JS) is a recently developed population-based metaheuristic inspired by the food-finding behavior of jellyfish in the ocean. The purpose of this paper is to propose a quantum-based Jellyfish Search algorithm, named Quantum JS (QJS), for solving structural optimization problems. Compared to the classical JS, three main improvements are made in the proposed QJS: (1) a quantum-based update rule is adopted to encourage the diversification in the search space, (2) a new boundary handling mechanism is used to avoid getting trapped in local optima, and (3) modifications of the time control mechanism are added to strike a better balance between global and local searches. The proposed QJS is applied to solve frequency-constrained large-scale cyclic symmetric dome optimization problems. To the best of our knowledge, this is the first time that JS is applied in frequency-constrained optimization problems. An efficient eigensolution method for free vibration analysis of rotationally repetitive structures is employed to perform structural analyses required in the optimization process. The efficient eigensolution method leads to a considerable saving in computational time as compared to the existing classical eigensolution method. Numerical results confirm that the proposed QJS considerably outperforms the classical JS and has superior or comparable performance to other state-of-the-art optimization algorithms. Moreover, it is shown that the present eigensolution method significantly reduces the required computational time of the optimization process compared to the classical eigensolution method.

---

The present work deals with optimization and reliability assessment of double layer barrel vaults. In order to achieve the optimization task an improved colliding bodies optimization algorithm is employed. In the first phase of this study, different forms of double layer barrel vaults namely, square-on-square, square-on-diagonal, diagonal-on-diagonal and diagonal-on-square are considered and designed for optimal weight by the improved colliding bodies optimization algorithm. In the second phase, in order to account for the existing uncertainties in action and resistance of the structures, the reliability of the optimally designed double layer barrel vaults is assessed using importance sampling method by taking into account a limit-state function on the maximum deflection of the structures. The results demonstrate that the minimum reliability index of the optimal designs is 0.92 which means that all the optimally designed double layer barrel vaults are reliable and safe against uncertainties.  

---

The optimal design of dome structures is a challenging task and therefore the computational performance of the currently available techniques needs improvement. This paper presents a combined algorithm, that is supported by the mixture of Charged System Search (CSS) and Teaching-Learning-based optimization (TLBO). Since the CSS algorithm features a strong exploration and may explore all unknown locations within the search space, it is an appropriate complement to enhance the optimization process by solving the weaknesses with using another optimization algorithm’s strong points. To enhance the exploitation ability of this algorithm, by adding two parts of Teachers phase and Student phase of TLBO algorithm to CSS, a method is obtained that is more efficient and faster than standard versions of these algorithms. In this paper, standard optimization methods and new hybrid method are tested on three kinds of dome structures, and the results show that the new algorithm is more efficient in comparison to their standard versions.

---

The arithmetic optimization algorithm (AOA) is a recently developed metaheuristic optimization algorithm that simulates the distribution characteristics of the four basic arithmetic operations (i.e., addition, subtraction, multiplication, and division) and has been successfully applied to solve some optimization problems. However, the AOA suffers from poor exploration and prematurely converges to non-optimal solutions, especially when dealing with multi-dimensional optimization problems. More recently, in order to overcome the shortcomings of the original AOA, an improved version of AOA, named IAOA, has been proposed and successfully applied to discrete structural optimization problems. Compared to the original AOA, two major improvements have been made in IAOA: (1) The original formulation of the AOA is modified to enhance the exploration and exploitation capabilities; (2) The IAOA requires fewer algorithm-specific parameters compared with the original AOA, which makes it easy to be implemented. In this paper, IAOA is applied to the optimal design of large-scale dome-like truss structures with multiple frequency constraints. To the best of our knowledge, this is the first time that IAOA is applied to structural optimization problems with frequency constraints. Three benchmark dome-shaped truss optimization problems with frequency constraints are investigated to demonstrate the efficiency and robustness of the IAOA. Experimental results indicate that IAOA significantly outperforms the original AOA and achieves results comparable or superior to other state-of-the-art algorithms.

---

This study is devoted to seismic collapse safety analysis of performance based optimally seismic designed steel chevron braced frame structures. An efficient meta-heuristic algorithm namely, center of mass optimization is utilized to achieve the seismic optimization process. The seismic collapse performance of the optimally designed steel chevron braced frames is assessed by performing incremental dynamic analysis and determining their adjusted collapse margin ratios. Two design examples of 5-, and 10-story chevron braced frames are illustrated. The numerical results demonstrate that all the performance-based optimal designs are of acceptable seismic collapse safety.

---

As a novel strategy, Quantum-behaved particles use uncertainty law and a distinct formulation obtained from solving the time-independent Schrodinger differential equation in the delta-potential-well function to update the solution candidates’ positions. In this case, the local attractors as potential solutions between the best solution and the others are introduced to explore the solution space. Also,  the difference between the average and another solution is established as a new step size. In the present paper, the quantum teacher phase is introduced to improve the performance of the current version of the teacher phase of the Teaching-Learning-Based Optimization algorithm (TLBO) by using the formulation obtained from solving the time-independent Schrodinger equation predicting the probable positions of optimal solutions. The results show that QTLBO, an acronym for the Quantum Teaching- Learning- Based Optimization, improves the stability and robustness of the TLBO by defining the quantum teacher phase. The two circulant space trusses with multiple frequency constraints are chosen to verify the quality and performance of QTLBO. Comparing the results obtained from the proposed algorithm with those of the standard version of the TLBO algorithm and other literature methods shows that QTLBO increases the chance of finding a better solution besides improving the statistical criteria compared to the current TLBO.
 

---

The lateral-torsional buckling (LTB) strength of cellular steel girders that were subjected to web distortion was rarely examined. Since no formulation has been presented for predicting the capacity of such beams, in the current paper an extensive numerical investigation containing 660 specimens was modeled using finite element analysis (FEA) to consider the ultimate lateral-distortional buckling (LDB) strength of such members. Then, a reliable algorithm based on the artificial neural networks (ANNs) was developed and the most accurate model was chosen to derive an efficient formula to evaluate the LDB capacity of steel cellular beams. The input and target data required in the ANN models were provided using the ANN analyzes. An attempt was made to include the proposed formula in all the variables affecting the LDB of cellular steel beams. In the next step, the validity of the proposed formula was proved by several statistical criteria, and also the most influential input variable was discussed. eventually, a comparison study was executed between the results provided by the ANN-based equation and the AS4100, EC3, and AISC codes. It was revealed that the presented equation is accurate enough and can be used by practical engineers.
 

---

In this study, the finite element model updating was simulated by reducing the stiffness of the members. Due to lack of access to the experimental results, the data obtained from an analytical model were used in the proposed structural damage scenarios. The updating parameters for the studied structures were defined as a reduction coefficient applied to the stiffness of the members. Parameter variations were calculated by solving an unconstrained nonlinear optimization problem. The objective function in the optimization problem was proposed based on the Multi-Degree-of-Freedom (MDOF) equations of motion as well as the dynamic characteristics of the studied structure. Only the first natural frequency of the damaged structure was used in the proposed updating process, and only one vibration mode was used in the updating problem and damage identification procedure. In addition, as elimination of high-order terms in the proposed formula introduced errors in the final response, the variations of natural frequency and vibration mode for higher-order terms were included in the free vibration equation of the proposed objective function. The Colliding Bodies Optimization (CBO) algorithm was used to solve the optimization problem. The performance of the proposed method was evaluated using the numerical examples, where different conditions were applied to the studied structures. The results of the present study showed that, the proposed method and formulation were capable of efficiently updating the dynamic parameters of the structure as well as identifying the location and severity of the damage using only the first natural frequency of the structure.
 

---

A dual structural fused system consists of replaceable ductile elements (fuses) that sustain major seismic damage and leave the primary structure (PS) virtually undamaged. The seismic performance of a fused structural system is determined by the combined behavior of the individual PS and fuse components. In order to design a feasible and economic structural fuse concept, we need a procedure to choose the most efficient combination of the PS and fuse systems subject to the stringent constraints of seismic performance and minimum structural cost objectives, simultaneously. In this paper, an efficient method is developed for minimum cost design of dual fused building structures using a performance-based seismic design procedure. The method involves updating a set of reference parameters to find the most suitable combination of PS and fuse structures with satisfactory seismic performance and optimum total structural cost, concurrently. For a set of preselected reference parameters, the structural design variables including primary and fuse structural member sizes are determined through individual linear elastic design processes. Therefore, a limited number of inelastic analyses are required to evaluate seismic response of the combined fused system. The proposed method is applied to seismic design optimization of a moment resisting frame equipped with BRBs as structural fuses. The obtained results indicate that proposed design optimization procedure is sufficiently robust and reliable to design cost-effective structural fuse systems with satisfactory seismic performance.
 

---

Explosions are inevitable in today’s world; therefore, building structures may be dynamically loaded by an intense loading during the explosion. This is why regulatory bodies have provided instructions for determining the response of structures under the explosion load. Previous research has shown that when the explosion happens close to a structure, the ground explosion load can be modeled as tensile and compressive loads. This research investigates the response of an elastic-plastic single-degree-of-freedom system subjected to different explosive loads with different positive durations. The maximum intensity of blast load and blast duration remains constant, and the positive phase duration is the only variable that changes. The nonlinear dynamic responses of a single-degree-of-freedom system (i.e., displacement, velocity, acceleration, and ductility) are calculated using the linear acceleration method. The results show that increasing the positive phase duration and the amount of positive impact can increase the maximum displacement and ductility of the system. Also, it can be concluded that the maximum acceleration of the studied systems remains constant when the values for the blast impact and positive phase durations change.
 

---

Design optimization of cable-stayed bridges is a challenging optimization problem because a large number of variables is usually involved in the optimization process. For these structures the design variables are cross-sectional areas of the cables. In this study, an efficient metaheuristic algorithm namely, momentum search algorithm (MSA) is used to optimize the design of cable-stayed bridges. The MSA is inspired by the Physics and its superiority over many metaheuristics has been demonstrated in tackling several standard benchmark test functions. In the current work, the performance of MSA is compared with that of two other metaheuristics and it is shown that the MSA is an efficient algorithm to tackle the optimization problem of cable-stayed bridges.
 

---

The main aim of this study, is to evaluate the seismic reliability of steel concentrically braced frame (SCBF) structures optimally designed in the context of performance-based design. The Monte Carlo simulation (MCS) method and neural network (NN) techniques were utilized to conduct the reliability analysis of the optimally designed SCBFs. Multi-layer perceptron (MLP) trained by back propagation technique was used to evaluate the required structural responses and then the total exceedence probability associated with the seismic performance levels was estimated by the MCS method. Three numerical examples of 5-, 10-, and 15-story SCBFs with fixed and optimal topology of braces are presented and their probability of failure was evaluated considering the resistance characteristics and the seismic loading of the structures. The numerical results indicate that the SCBFs with optimal topology of braces were more reliable than those with fixed topology of braces.