Journal archive for Google Scholar Robot!

Iranian Journal of Materials Science and Engineering

Home | All volumes | All issues | All articles

Volume 21, Number 3 (2024-9)

Optimizing Biocompatibility of Mg-AZ31B Alloy Through Varied Surface Roughness and Anodization Time
[Abstract-EN] | [PDF-EN] | [XML]
On the Magnetic Properties of High Entropy Intermetallic Compounds
[Abstract-EN] | [PDF-EN] | [XML]
Synthesis of ZrSe2 Nanoparticles by Hydrothermal Method for Gas Sensing Applications
[Abstract-EN] | [PDF-EN] | [XML]
High Temperature Deformation Behavior and Microstructural Evolution of Nb-10Hf-1Ti Alloy Produced by Vacuum Arc Melting
[Abstract-EN] | [PDF-EN] | [XML]
The Effect of Temperature on the Microstructures of Additively Manufactured Ti6Al4V(ELI).
[Abstract-EN] | [PDF-EN] | [XML]
Nano-Silica Coatings and Their Effect on the Hydrophobicity and Electrical Properties of Power Line Porcelain Insulators
[Abstract-EN] | [PDF-EN] | [XML]
Detailed Investigation on Possible Phases During Solid-State Synthesis of MnAl Intermetallic Compound
[Abstract-EN] | [PDF-EN] | [XML]
Biogenic Synthesis of Papain Conjugated Copper Metallic Nanoparticles and Its Antibacterial and Antifungal Activity
[Abstract-EN] | [PDF-EN] | [XML]
Efect of Potassium Hydroxide Concentration and Activation Time on Rice Husk-Activated Carbon for Water Vapor Adsorption
[Abstract-EN] | [PDF-EN] | [XML]
Investigation of the Simultaneous Effect of Electrolyte Additives and α-PbO2 Intermediate Layer on the Electrodeposition of Ti/β-PbO2 Electrode
[Abstract-EN] | [PDF-EN] | [XML]
Using Natural-Product-Based Treatments, Such as Polymer loaded with Ginger for the Management of Osteochondral Disorder
[Abstract-EN] | [PDF-EN] | [XML]
A Study on the Role of Plasticizers on the Mechanical Properties of Acrylic Resin
[Abstract-EN] | [PDF-EN] | [XML]

Volume 21, Number 2 (2024-6)

Cobalt Doped Bioactive Glasses: Sinterabilty, Crystallization Trend, and Bioderadation Assessment of Relevant Glass-Ceramic Scaffolds
[Abstract-EN] | [PDF-EN] | [XML]
The Impact of Preparation Time on AgNPs Doped PVA and Its Implication in Antimicrobial Activity
[Abstract-EN] | [PDF-EN] | [XML]
Superior Photocatalytic Efficiency with Titania (TiO2)-Polyaniline (PANI) Nanocomposite for Rapid Carbol Fuchsin (CF) Dye Degradation
[Abstract-EN] | [PDF-EN] | [XML]
Biosynthesis of Silver Nanoparticles Reduced by Aerodramus Fuciphagus Extracts for Antibacterial Applications.
[Abstract-EN] | [PDF-EN] | [XML]
A Comparison of Microstructure, Hardness, and Wear Behavior of Ti matrix Composites Reinforced with in-Situ Reinforcements Synthesized Using TiB2 and B4C
[Abstract-EN] | [PDF-EN] | [XML]
Experimental Inquiry and Machine Learning for Predictive Analysis of Friction Stir Welded AA5052 and AZ31B Dissimilar Joints
[Abstract-EN] | [PDF-EN] | [XML]
Ni-W Alloy Coating as an Efficient Electrocatalyst for the Hydrogen Evolution Reaction: Effect of Electroplating Current Density on Morphology and Electrocatalytic Properties
[Abstract-EN] | [PDF-EN] | [XML]
Numerical Optimization of Successive Ionic Layer Adsorption and Reaction Synthesized Zinc Oxide Thin Film as Electron Transport Layer for Organic and Perovskite Solar Cells
[Abstract-EN] | [PDF-EN] | [XML]
Optimizing Organic Solar Cells: The Effect of P3HT:PCBM Active Layer and Ca Interference Layer
[Abstract-EN] | [PDF-EN] | [XML]
Effect of Multiaxiality on the Stress Rupture Properties of P92 Steel
[Abstract-EN] | [PDF-EN] | [XML]
Synthesis and Characterization of Nanostructured (Fe80Ni20)1-xCrx(x= 0, 4) Alloys Using Mechanical Alloying and Density Functional Theory
[Abstract-EN] | [PDF-EN] | [XML]
The Effect of PSi Pore Structure on the Characteristics of ZnO Rods Fabricated by Hydrothermal Method
[Abstract-EN] | [PDF-EN] | [XML]
Optimization of AG/RGO/TIO2 Nanocomposite for Peropvskite Solar Cells
[Abstract-EN] | [PDF-EN] | [XML]
Fabrication of Novel CuWO4/SnO2 heterogeneous Photocatalyst for Efficient Degradation of Rose Bengal Dye under Visible Light Irradiation
[Abstract-EN] | [PDF-EN] | [XML]

Volume 21, Number 1 (2024-3)

Cation Distribution of Co-Ni-Mn Ferrites from Magnetization and Magnetostriction
[Abstract-EN] | [PDF-EN] | [XML]
CuO (Copper Oxide) Thin Films by Successive Ionic Layer Adsorption and Reaction (SILAR): A Sustainable Approach for Solar-Driven Methylene Blue (MB) Degradation
[Abstract-EN] | [PDF-EN] | [XML]
Synthesis and Characterizations of Ni-W alloy
[Abstract-EN] | [PDF-EN] | [XML]
Sol-gel Approach for the Synthesis and Characterization of Mg and Cu Substituted Mn-Zn Ferrite Nanoparticles
[Abstract-EN] | [PDF-EN] | [XML]
Antibacterial Activity of Biosilver Nanoparticles in Combination with Antibiotics
[Abstract-EN] | [PDF-EN] | [XML]
Electro-Optical Properties Of Cds Thin Films By Chemical Bath Technique
[Abstract-EN] | [PDF-EN] | [XML]
Structural,Optical, and Supercapacitive Properties of Pure, Nickel, and Molybdenum IonDoped Trimanganese Tetraoxide (Mn3O4) Thin Films
[Abstract-EN] | [PDF-EN] | [XML]
Ferric and Ferrous Molar ratio Effect on Physical and Magnetic Properties of Iron Oxide Nanoparticles
[Abstract-EN] | [PDF-EN] | [XML]
Chemical Synthesis and Characterization Study of Nanocrystalline and Coral Rock-Like Kasterite Cu2ZnSnS4 (CZTS) Thin Films
[Abstract-EN] | [PDF-EN] | [XML]

Volume 20, Number 4 (2023-12)

Comparative Study of Mechanical Properties of MWCNT and Functionalized MWCNT/PAEK Nanocomposites
[Abstract-EN] | [PDF-EN] | [XML]
Evaluation of Mechanical Properties of Epoxy Resin Nanocomposite Reinforced by CuO–GO Hybrid
[Abstract-EN] | [PDF-EN] | [XML]
Fabrication of Macro- AND Micropore Forming DCPD/ β-TCP Porous Scaffolds: Effect of Setting-Time Reaction and Acidic Calcium Phosphate Solution
[Abstract-EN] | [PDF-EN] | [XML]
Effect of Composition on the Properties of Cementitious Tile Adhesive Complied with EN 12004
[Abstract-EN] | [PDF-EN] | [XML]
Improving Reaction to Fire Properties of Thermoplastic Polyurethane with Intumescent Flame Retardants and MoS2
[Abstract-EN] | [PDF-EN] | [XML]
Adsorption Method for Removal of Pharmaceuticals from Wastewater: Review
[Abstract-EN] | [PDF-EN] | [XML]
Investigation on Surface Hardness and Microstructure Evolution in AA 7075-T651 Multi-Layered Laminate Fabricated Through Friction Stir Additive Manufacturing
[Abstract-EN] | [PDF-EN] | [XML]
Johnson–Mehl–Avrami–Kolmogorov (JMAK-type) Analysis of Deformation-Induced Martensitic Transformation in AISI 304L Stainless Steel
[Abstract-EN] | [PDF-EN] | [XML]
Duplex Mechanism of TiC Formation and Ti Dissolution Behavior in KCl-LiCl Molten Salt
[Abstract-EN] | [PDF-EN] | [XML]
Unveiling the Affect of Annealing Temperature on the Phase Transformations of Inconel 718 Superalloy Manufactured by Additive Manufacturing
[Abstract-EN] | [PDF-EN] | [XML]
Electrical Conductivity in the Molten and Glassy States of the Li2(O, Cl2, I2)-B2O3 system
[Abstract-EN] | [PDF-EN] | [XML]
Effect of Aging Process on Microstructure Evolution and Mechanical Properties of UFG Zn-22Al Alloy
[Abstract-EN] | [PDF-EN] | [XML]
Improvement of the Fatigue Life of 3D Printed Nano Soft Artificial Heart and Heart Valves
[Abstract-EN] | [PDF-EN] | [XML]

Volume 20, Number 3 (2023-9)

Upgrading Restorative Dentistry with Graphene Nanoparticles: A Review
[Abstract-EN] | [PDF-EN] | [XML]
The Effect of Boron Reinforced on the Supercapacitor Performance of RGO/ZnO:B Composite Electrodes
[Abstract-EN] | [PDF-EN] | [XML]
A Facile Synthesis of Metallic (Zn and Co) Ferrite nanostructures as Efficient Solid Photocatalysts for Degradation of Methyl Orange and Methyl Blue under Sunlight
[Abstract-EN] | [PDF-EN] | [XML]
Feasibility of Design One-Part Sodium Silicate Activated Metamontmorillonite-Limestone Cements
[Abstract-EN] | [PDF-EN] | [XML]
A Systematic Study on Mechanical Properties of CNT Reinforced HDPE Composites Developed Using 3D Printing
[Abstract-EN] | [PDF-EN] | [XML]
Hardness and Wear Characteristics of Laser-Clad WC-17Co Coatings on AISI H13 and AISI 4140 Steel
[Abstract-EN] | [PDF-EN] | [XML]
Effect of incorporation of amorphous calcium phosphate on bonding strength of a dental adhesive
[Abstract-EN] | [PDF-EN] | [XML]
The Formation of Red Copper Glaze in an Oxidizing Atmosphere
[Abstract-EN] | [PDF-EN] | [XML]
Parametric Investigation of Similar TiAl6V4 and AA2024 Rotary Friction Weld Joints Using Taguchi-L9 Array Method
[Abstract-EN] | [PDF-EN] | [XML]
Fabrication of Porous Biologic Hydroxyapatite Scaffold Reinforced with Polymer Coating for Bone Tissue Engineering Candidate
[Abstract-EN] | [PDF-EN] | [XML]
Effect of Voltage on the Properties of Cu2ZnSnS4 Solar Cells by Electrochemical Deposition
[Abstract-EN] | [PDF-EN] | [XML]
Mechanical and Microstructural Evaluation of Recycled AA7075 Swarf
[Abstract-EN] | [PDF-EN] | [XML]

Volume 20, Number 2 (2023-6)

Preparation and Characterization of P2O5 Containing Canasite Glass-Ceramics as Potential Materials for Dental Restorations
[Abstract-EN] | [PDF-EN] | [XML]
Effect of Heat-Treatment Temperatures on Magnetite Oxidation in 20SiO2.50FeO.30CaO Glass Ceramic Prepared by the Sol-Gel Method
[Abstract-EN] | [PDF-EN] | [XML]
The Effects of Rapid Solidification on the Microstructure and Mechanical Properties of Al5083
[Abstract-EN] | [PDF-EN] | [XML]
Effect of Poly(3-Hexylthiophene):Mixed Fullerene Indene-C60 Multi-Adducts Ratios on the Performance of Organic Solar Cells
[Abstract-EN] | [PDF-EN] | [XML]
Magnetic Characteristics of Nanocrystalline Co78Zr17B2Si1W2 Alloy Formed by Melt Spinning and Subsequent Annealing
[Abstract-EN] | [PDF-EN] | [XML]
Effect of Chemical Composition on Microstructure and Hydrophobic Properties of SiO2-TiO2@PDMS Coating
[Abstract-EN] | [PDF-EN] | [XML]
Structural and Magnetic Characteristics of Fe72-xCoxCr28 (10
[Abstract-EN] | [PDF-EN] | [XML]
Light-Emitting Diodes Based on Van Der Waals Heterostructures: a Review
[Abstract-EN] | [PDF-EN] | [XML]
Tribological Performance of Self-lubricating Cast Al-5Cu-1Mg Nanocomposite Reinforced with Graphene Nano Sheets
[Abstract-EN] | [PDF-EN] | [XML]
Acceleration of Bone-Implant Graft by Optimizing the Dimention and Crystalline Structure of Titanium, Oxide Nanotubes as the Titanium-Based Implant Coating
[Abstract-EN] | [PDF-EN] | [XML]
Multicrystalline Silicon Passivation by Hydrogen and Oxygen- Rich Porous Silicon Layer for Photovoltaic Cells Applications
[Abstract-EN] | [PDF-EN] | [XML]
Optical and Gas Sensing Properties of Pr Doped TiO2 Thin Films
[Abstract-EN] | [PDF-EN] | [XML]
Influence of Friction Stir Processing Parameters on the Mechanical and Corrosion Properties of Al-Cu-Li Alloy
[Abstract-EN] | [PDF-EN] | [XML]

Volume 20, Number 1 (2023-3)

The Effect of Graphite on the Iron-Silicide Compound Formation
[Abstract-EN] | [PDF-EN] | [XML]
First-Principles Analysis of Cr-Doped SrTiO3 Perovskite as Optoelectronic Materials
[Abstract-EN] | [PDF-EN] | [XML]
Adsorption Study of Pb(II) Ions on the Blast Furnace Slag (BFS) from Aqueous Solution
[Abstract-EN] | [PDF-EN] | [XML]
A Review on Dye-Sensitized Solar Cells (DSSCs), Materials and Applications
[Abstract-EN] | [PDF-EN] | [XML]
An Investigation into Mechanical Properties of Aluminum Matrix Nanocomposite Reinforced by Graphene–Boron Nitride Hybrid
[Abstract-EN] | [PDF-EN] | [XML]
The Comparison of Effects of Ultrasonic Treatment, SIMA Process and Al-5Ti-1B Grain Refiner on the Microstructure and Mechanical Properties of Al–15%Mg2Si in-situ Composite
[Abstract-EN] | [PDF-EN] | [XML]
Resonance Phenomenon and Structural Properties of Fe Substituted Pzt Ceramics Prepared by Sol-Gel Method
[Abstract-EN] | [PDF-EN] | [XML]
Effects of Thermomechanical Treatment on Microstructural and Mechanical Behavior of an Austenitic Steel Contains 1.4% Al and 17.5% Mn
[Abstract-EN] | [PDF-EN] | [XML]
3D Coupled Thermal-Electrical-Structural Finite Element Investigation on the Effect of Welding Parameters on the Geometry of Nugget Zone and HAZ in RSWed TRIP Steel Joints
[Abstract-EN] | [PDF-EN] | [XML]
The Effect of The Number of Kevlar Layers Impregnated Nano SiC on Ballistic Resistance of Hybrid Laminated Al7075 Composites as Lightweight Material
[Abstract-EN] | [PDF-EN] | [XML]
Emerging Nano-Theranostic Strategies Against Non-Alcoholic Fatty Liver Disease: A review
[Abstract-EN] | [PDF-EN] | [XML]
Physical Properties of Reactively Sputter-Deposited C-N Thin Films
[Abstract-EN] | [PDF-EN] | [XML]

Volume 19, Number 4 (2022-12)

Comparative Analysis on Reinforcement of Potential Additives in WOKA Cermet HVOF Coating Subjected to Slurry Erosion in Ash Conditions
[Abstract-EN] | [PDF-EN] | [XML]
Leaching Kinetics of Chalcopyrite Concentrate by Ionic Liquids
[Abstract-EN] | [PDF-EN] | [XML]
Microstructural Behavior and Corrosion Analysis of Lean Duplex Stainless Steel 2101 under the Influence of Variable Heat Inputs Using Gas Tungsten Arc Welding
[Abstract-EN] | [PDF-EN] | [XML]
Investigating the Effect of Zero Prewetting Time on Rougher Flotation of Coal Tailings
[Abstract-EN] | [PDF-EN] | [XML]
Resistance of the Hardened Cement with Calcined Clays
[Abstract-EN] | [PDF-EN] | [XML]
A Study on Durability Performance of Concretes Incorporating Graphene Oxide Nanoplatelets and Ground Granulated Blast Furnace Slag
[Abstract-EN] | [PDF-EN] | [XML]
Influence of Annealing Temperature on Structural and Electrical Properties of Screen Printed Lanthanum Oxide Thick Films
[Abstract-EN] | [PDF-EN] | [XML]
Optimization and Modelling of Resistance Spot Welding Process Parameters for Quality Improvement Using Taguchi Method and Artificial Neural Network
[Abstract-EN] | [PDF-EN] | [XML]
Cytotoxicity and Genotoxicity Evaluation of Fluorapatite/bioactive Glass Nanocomposite Foams With Two Various Weight Ratios as Bone Tissue Scaffold: an in vitro study
[Abstract-EN] | [PDF-EN] | [XML]
Mechanical and Tribological Behavior of Aluminum Alloy LM13 Reinforced with Titanium Dioxide Metal Matrix Composites
[Abstract-EN] | [PDF-EN] | [XML]
Corrosion and Antibacterial Behavior of CrN Single-layer Coating and CrN/Cu Multilayer Nanostructured Coatings Applied by Cathodic Arc Evaporation Technique
[Abstract-EN] | [PDF-EN] | [XML]
The Study of the Electrochemical and Tribological Behaviors of CrN/AlCrN Coating Deposited by the Arc-PVD Technique
[Abstract-EN] | [PDF-EN] | [XML]
The Structural, Morphological, Optical and Photoluminescence Studies of Mn2+ Doped CdS/Zn3(PO4)2 Nanocomposites
[Abstract-EN] | [PDF-EN] | [XML]

Volume 19, Number 3 (2022-9)

Facile Preparation and Characterization of SiO2 Nanoparticles and Study of the Relation Between Contact Angle and Different Parameters
[Abstract-EN] | [PDF-EN] | [XML]
Effect of Annealing Temperature and Composition on Magnetic Properties of Manganese-Bismuth Homogenized in Tube Furnace
[Abstract-EN] | [PDF-EN] | [XML]
Evaluation of the Influence of the Number of Laser Shots on the Characterization of TiO2/MgO Nanocomposites
[Abstract-EN] | [PDF-EN] | [XML]
Wear Properties of Al/MoS2 Nanocomposite Coatings Created by Electro Spark Deposition on the Surface of Ti-6Al-4V Alloy
[Abstract-EN] | [PDF-EN] | [XML]
Effects of Al Doping on the Properties of Li7La3Zr2O12 Garnet Solid Electrolyte Synthesized by Combustion Sol-gel Method
[Abstract-EN] | [PDF-EN] | [XML]
The Influence of Heat Treatment and High Energy Ball Milling on the Density, Hardness, and Wear Behavior of Al 7150 Alloy via Hot Uniaxial Compaction
[Abstract-EN] | [PDF-EN] | [XML]
Preparation of Nanohybrid CuO-Fe3O4 /Zeolite Nanocomposite as Potential Adsorbent for Toxic As (V) and Pb(II) from Water Solution.
[Abstract-EN] | [PDF-EN] | [XML]
Structural and Optical Characterization of ZnO-Graphene Nanocomposite Quantum Dots
[Abstract-EN] | [PDF-EN] | [XML]
Room Temperature Cured Hydrophobic Nano-silica Coatings for Outdoor Insulators Installed on Power Lines without Shutting Down the Current
[Abstract-EN] | [PDF-EN] | [XML]
Evaluation of Microstructure and Mechanical Properties of Thermomechanically Processed β Ti‐35Nb‐7Zr‐5Ta Alloy
[Abstract-EN] | [PDF-EN] | [XML]
High Photocatalytic Performance in the Photodegradation of MB Dye of Photocatalytic Efficiency of ZnO/Fe3O4 and TiO2/Fe3O4 Under Visible Light Irradiation
[Abstract-EN] | [PDF-EN] | [XML]
Resin-based Copper-free Brake Pads: A Right Selection of Potassium Titanate and Ceramic Fiber
[Abstract-EN] | [PDF-EN] | [XML]

Volume 19, Number 2 (2022-6)

Synthesis and Characterization of a Urethane Dimethacrylate Monomer Containing a Quaternary Ammonium Salt for Use as a Component of Orthodontic Adhesive Primer
[Abstract-EN] | [PDF-EN] | [XML]
Fabrication and Evaluation of in Vitro Studies of Biodegradable and Antibacterial Composite Scaffolds Based on Polylactic Acid-Polycaprolactone-Hydroxyapatite Reinforced with Graphene and Zinc Oxide Nanoparticles for Use in Orthopedic Surgery
[Abstract-EN] | [PDF-EN] | [XML]
Effect of Crosslinking on Control Drug Release of Hydroxychloroquine sulphate drug-using Alginate beads
[Abstract-EN] | [PDF-EN] | [XML]
Multifunctional Silver-based Nanomaterials for Non-conventional Oral Cancer Therapy Through Simultaneous LOX and Selective COX-2 inhibition
[Abstract-EN] | [PDF-EN] | [XML]
Corrosion and Bioactivity Properties of Calcium-phosphate PEO Coating on AZ31 Mg Alloy Reinforced by Forsterite (Mg2SiO4) Nanoparticles
[Abstract-EN] | [PDF-EN] | [XML]
In Vitro Release Kinetics of Curcumin From Thermosensitive Gelatin-Chitosan Hydrogels Containing Zinc Oxide Nanoparticles
[Abstract-EN] | [PDF-EN] | [XML]
Physicochemical Evaluation and in Vitro Hemocompatibility of Goat Gelatin: Bioactive Dressing to Promote Wound Healing
[Abstract-EN] | [PDF-EN] | [XML]
The Effect of Gamma Rays on Gelatin/ Chitosan as bioactive wound-healing dressing physico-chemical and Biological Properties
[Abstract-EN] | [PDF-EN] | [XML]
Applications of Bioceramics in the Management of Orbital Floor Factures and Anophthalmic Cavity: a Review
[Abstract-EN] | [PDF-EN] | [XML]
Fluorapatite: A Review of Synthesis, Properties and Medical Applications vs Hydroxyapatite
[Abstract-EN] | [PDF-EN] | [XML]
Ibuprofen Loaded Chitosan Films: in Vitro Assessment of Drug Release Profile and Cell Viability on Primary Neurons Culture
[Abstract-EN] | [PDF-EN] | [XML]
Recent Advances in the Green Synthesis of Gold and Silver Nanostructures for Augmented Anti-Microbial Activity
[Abstract-EN] | [PDF-EN] | [XML]
Specifications of Biodegradable Restricted PCL and PLLA Chains in Biocompatible PEG-b-PCL and PEG-b-PLLA Single Crystals
[Abstract-EN] | [PDF-EN] | [XML]

Volume 19, Number 1 (2022-3)

Effect of the Number of Dips on the Properties of Copper Oxide Thin Films Deposited by Sol-Gel Dip- Coating Technique
[Abstract-EN] | [PDF-EN] | [XML]
Computational analysis on Elastic-Plastic fracture of Al/B4C and Al2SiO5 hybrid metal matrix composites
[Abstract-EN] | [PDF-EN] | [XML]
Tribological and Electrochemical Behavior of CrN/ZrN multilayer Coatings Produced by Arc-PVD
[Abstract-EN] | [PDF-EN] | [XML]
Adsorption Kinetics of Basic Blue-41 Dye onto Synthetic Foam-Shaped Zeolite ZSM-5
[Abstract-EN] | [PDF-EN] | [XML]
Thermal and Electrical Characterization of (1-x)Na2O-xAl2O3-P2O5 System Glasses
[Abstract-EN] | [PDF-EN] | [XML]
Effect of Anorthite on Physical and Mechanical Properties of Bone China Bodies
[Abstract-EN] | [PDF-EN] | [XML]
The Structural, Electric and Dielectric Properties of Ni0.7Cd0.3NdxFe2-xO4 (0≤x≤0.03) Ferrite Prepared via Oxalate Co-Precipitation Route
[Abstract-EN] | [PDF-EN] | [XML]
Effect of Solution Treatment on the Rollability of a Cu-Ni-Mn-Sn Alloy
[Abstract-EN] | [PDF-EN] | [XML]
The Effects of B Addition on the Structure and Magnetic Properties of AlCrFeNiMnSi High Entropy Alloy
[Abstract-EN] | [PDF-EN] | [XML]
Hydration and Engineering Properties of Mechanically-Activated Composite Cement from Processed Steel Slag and Limestone
[Abstract-EN] | [PDF-EN] | [XML]
On the High Temperature Compressive Flow Behavior of Mg-4Sn Magnesium Alloy
[Abstract-EN] | [PDF-EN] | [XML]
Experimental and Numerical Investigation on the Heat Treatment Effects of AA6063 Aluminum Alloy Tubes During Rotary Draw Bending
[Abstract-EN] | [PDF-EN] | [XML]

Volume 18, Number 4 (2021-12)

Surface Modification of the SnO2 Layer Using UV-Ozone in a Perovskite Solar Cell with a Planar Structure
[Abstract-EN] | [PDF-EN] | [XML]
Effects of the Post-deposition Annealing Treatment on the Electrochemical Behavior of TiN Coating Deposited by CAE-PVD Method
[Abstract-EN] | [PDF-EN] | [XML]
Effect of Ply Orientation on Residual Stresses and Their Influence on Mode I Fracture Toughness of Glass-Epoxy Composites with 0°//0° Crack Interface
[Abstract-EN] | [PDF-EN] | [XML]
Dry Sliding Friction and Wear of SnPb-Solder Affected Copper against Stainless Steel Counter Surface
[Abstract-EN] | [PDF-EN] | [XML]
Characterization of Aluminum Matrix Composites Reinforced with Al2O3, SiC and Graphene Fabricated by Spark Plasma Sintering
[Abstract-EN] | [PDF-EN] | [XML]
Physical and Structural Characteristics of Gel-derived Glasses Prepared via Different Drying Procedures
[Abstract-EN] | [PDF-EN] | [XML]
Role of the Electrostatic Mechanism in the Filtration Process of Nanofibers
[Abstract-EN] | [PDF-EN] | [XML]
The Effect of Tin Concentration on Microstructural, Optical and Electrical Properties of ITO Nanoparticles Synthesized Using Green Method
[Abstract-EN] | [PDF-EN] | [XML]
Investigation of Tribological Behavior on the Mechanical Properties of TiB2, Al2O3 Reinforced AA6061 Matrix Sintered Hybrid Composites
[Abstract-EN] | [PDF-EN] | [XML]
Study of the Effect of Acid-base Character of the Lamellar Double Hydroxides "Zn3Al-CO3" and of the "Ghassoul" Clay on Their Redox Potential and Antimicrobial Activities
[Abstract-EN] | [PDF-EN] | [XML]
Microstructure and Mechanical Behaviour of Stir Casting Al/SiCp/Mg/Cu Composite with Varying Pouring Temperatures
[Abstract-EN] | [PDF-EN] | [XML]
Assessment of Structure, Dielectric and Gamma-Shielding Properties of Chemically Treated Natural Kaolinitic Clay
[Abstract-EN] | [PDF-EN] | [XML]

Volume 18, Number 3 (2021-9)

Structural and Luminescence Properties of SnO2 Nanostructures Via Porcine Gelatin-Assisted Synthesis
[Abstract-EN] | [PDF-EN] | [XML]
Effects of Rapid Infrared Heating and Cryogenic Cooling on the Tensile Properties and Fracture Behavior of Al-Cu-Mg
[Abstract-EN] | [PDF-EN] | [XML]
Characterization of Nanocrystalline NiP Alloy Coatings Electrodeposited at Various Current Densities
[Abstract-EN] | [PDF-EN] | [XML]
A Surface Conversion Treatment on a Borided and Cemented Seel Coated with Chromium Filme
[Abstract-EN] | [PDF-EN] | [XML]
Effect of Ultraviolet and Solar Radiation on Photocatalytic Dye (Black-E and Congo Red) Degradation Using Copper Oxide Nanostructure Particles
[Abstract-EN] | [PDF-EN] | [XML]
Utilization of Edible Mushroom for Nanomaterial-based Bioactive Material Development
[Abstract-EN] | [PDF-EN] | [XML]
Implication of Thermodynamic Functions and Speciation Diagrams in Analysis of Solvent Extraction Behavior of Samarium from Acidic Solutions
[Abstract-EN] | [PDF-EN] | [XML]
Manufacturing and Structural Evaluation of Polymer Derived SiOC/TiC and SiOC/TiC/mullite Nanocomposites
[Abstract-EN] | [PDF-EN] | [XML]
An Assessment on Residual Stress Measurement in FRP Composites Using Relaxation Techniques
[Abstract-EN] | [PDF-EN] | [XML]
Structural, Dielectric and Electrical Properties of Modified BaTi0.80Fe0.20O3 Ceramics by Zr Addition in Ti Site at x=0.00 to 0.10.
[Abstract-EN] | [PDF-EN] | [XML]
Assessment of the Microstructure and Solidification Characteristics of Al–20%Mg2Si Composite under Melt Superheating Treatment Using Thermal Analysis
[Abstract-EN] | [PDF-EN] | [XML]
A Brief Review of the Synthesis of ZnO Nanoparticles for Biomedical Applications
[Abstract-EN] | [PDF-EN] | [XML]

Volume 18, Number 2 (2021-6)

Structural and Morphological Characterization of the Expanded Graphite Obtained by Ball Milling and HF Leaching
[Abstract-EN] | [PDF-EN] | [XML]
Rheological Comparison of Silicone Rubber Crosslinking with Platinum Catalysts and Triethylamine, Methanol & Ethanolamine Solvents
[Abstract-EN] | [PDF-EN] | [XML]
Influence of Silicon Additions on Microstructure and Mechanical Properties of Manganese Bronze Alloys
[Abstract-EN] | [PDF-EN] | [XML]
The Study of Structure and Transitional Phases in B0.95Bi0.05Ti1-xFexO3 Ceramics Synthesized by Solid State Route
[Abstract-EN] | [PDF-EN] | [XML]
Optimization of Parameters for the Friction Stir Processing and Welding of AA1050 Aluminum Alloy
[Abstract-EN] | [PDF-EN] | [XML]
The Effect of Temperature on the Purity of Nano-Scale Tantalum Powder Produced from Its Scrap by Reaction with Magnesium and Calcium
[Abstract-EN] | [PDF-EN] | [XML]
The Response of GFRP Nanocomposites Reinforced with Functionalized SWCNT Under Low Velocity Impact: Experimental and LS-DYNA Simulation Investigations
[Abstract-EN] | [PDF-EN] | [XML]
The Influence of Milling Parameters on Surface Properties in Milled AZ91C Magnesium Alloy
[Abstract-EN] | [PDF-EN] | [XML]
Influence of Heat Treatment on the AA6061 and AA6063 Aluminum Alloys Behavior at Elevated Deformation Temperature
[Abstract-EN] | [PDF-EN] | [XML]
The Effect of Thermal Annealing on Structural, Morphological and Optical Features of BaTiO3 Thin Film assisted by e-beam PVD Technique
[Abstract-EN] | [PDF-EN] | [XML]
Multicrystalline Materials Analysis Based on Their Microstructure with Emphasis on Predicting Forming Limit Diagrams
[Abstract-EN] | [PDF-EN] | [XML]
Characterization of the Early Surface Films Dynamically Formed on Molten AZ91D and AM60B Alloys Under Different Atmospheres: A Comparative Study
[Abstract-EN] | [PDF-EN] | [XML]

Volume 18, Number 1 (2021-3)

Corrosion Behavior of API 5L X70 Carbon Steels in Hydrogen Sulfide Environments
[Abstract-EN] | [PDF-EN] | [XML]
Study on the Post-annealing Process of Nb-Hf Alloy Produced by Spark Plasma Sintering
[Abstract-EN] | [PDF-EN] | [XML]
Structural, Morphological and Anti-bacterial Analysis of Nanohydroxyapatite Derived from Biogenic (SHELL) and Chemical Source: Formation of Apatite
[Abstract-EN] | [PDF-EN] | [XML]
Porous Slow Release Silicate-Phosphate Glasses Synthesized By Polymer-Derived Ceramics Method Appropriate For Plants Nourishment
[Abstract-EN] | [PDF-EN] | [XML]
Influence of Erbium Addition on the Microstructural Evolution and Tensile Properties of Al/Mg2Si in-situ Metal Matrix Composites
[Abstract-EN] | [PDF-EN] | [XML]
The Effect of Niobium Addition on the Microstructure and Tensile Properties of Iron-Nickel Base A286 Superalloy
[Abstract-EN] | [PDF-EN] | [XML]
Optimization of Solvent Extraction Parameters for Separation of Samarium and Lutetium from Acidic Media Using Response Surface Methodology (RSM)
[Abstract-EN] | [PDF-EN] | [XML]
Mortar Properties Improvement by Using Fine Portland Cement Clinker as Reactive Aggregate
[Abstract-EN] | [PDF-EN] | [XML]
The Microstructure and Translucency Investigation of Cellulose Containing Low Temperature Fritted Soft-paste Porcelain
[Abstract-EN] | [PDF-EN] | [XML]
Effect of Process Parameters on Thermo-mechanical Behavior of Direct Extrusion of Aluminum Alloy
[Abstract-EN] | [PDF-EN] | [XML]
Synthesis and Characterization of CoFe2O4 and CuFe2O4 Composited with Hematite by Impregnation Method for Removing Organic Pollutants
[Abstract-EN] | [PDF-EN] | [XML]
Effect of Alloying Elements on Hardness and Electrical Conductivity of CU Nanocomposites Prepared by Mechanical Alloying
[Abstract-EN] | [PDF-EN] | [XML]

Volume 17, Number 4 (2020-12)

ANTIBACTERIAL PROPERTIES OF GO, GO:Ag, GO:ZnO THIN LAYERS AND GO:ZnO/GO:Ag BILAYERS SYNTHESIZED BY SPRAY PYROLYSIS METHOD
[Abstract-EN] | [PDF-EN] | [XML]
Adsorption of Zinc Oxide Nanoparticles onto Esterified Carbonize Sago Hampas: Kinetic and Equilibrium Studies
[Abstract-EN] | [PDF-EN] | [XML]
Anisotropy of Fractal Dimensions of Fractures and Loading Curves of Steel Samples During Impact Bending
[Abstract-EN] | [PDF-EN] | [XML]
Quenching of High Entropy Alloys after Annealing
[Abstract-EN] | [PDF-EN] | [XML]
Modeling the Dynamic Recrystallization by Using Cellular Automaton: The Current Status, Challenges and Future Prospects, a Review
[Abstract-EN] | [PDF-EN] | [XML]
The Effects of Contact Paste Type and Electric Field on Physical Properties of Zirconia Bodies Made by Flash Sintering Method: Modeling Via Response Surface Methodology
[Abstract-EN] | [PDF-EN] | [XML]
Densification and Shape Distortion of the Al-Cu-Mg Pre-alloyed Powder Compact in Supersolidus Liquid Phase Sintering Process
[Abstract-EN] | [PDF-EN] | [XML]
Surface Modification of Magnetic MnFe2O4@SiO2 Core-shell Nanoparticles with deposited Layer of 3-Aminopropyl Triethoxysilane
[Abstract-EN] | [PDF-EN] | [XML]
A Novel Porous Graphene Scaffold Prepared Using Freeze-drying Technique for Orthopedic Approaches: Fabrication and Buckling Simulation Using GDQ Method
[Abstract-EN] | [PDF-EN] | [XML]
The Effect of Pre-reduction of Graphene Oxide on the Electrochemical Performance of rGO-TiO2 Nanocomposite
[Abstract-EN] | [PDF-EN] | [XML]
The Austempering Kinetics, Microstructural Development and Processing Window in the Austempered, FE-3.2C-4.8AL Compacted Graphite Cast Iron
[Abstract-EN] | [PDF-EN] | [XML]
Synthesis of Novel Imidazolium Based Ionic Liquids for Use as Multifunctional Green Additives in Gear Oils
[Abstract-EN] | [PDF-EN] | [XML]
A Comparative Analysis of Structural and Electrochemical Properties of Graphene Oxide (GO) and Reduced Graphene Oxide (rGO) Synthesized by Using Hummer’s and Modified Hummer’s Method.
[Abstract-EN] | [PDF-EN] | [XML]
Green Synthesis of High-performance Graphene Geopolymer Composites: A Review on Environment-friendly Extraction of Nanomaterials
[Abstract-EN] | [PDF-EN] | [XML]
Plasma Nitriding Behavior of DIN 1.2344 Hot Work Tool Steel
[Abstract-EN] | [PDF-EN] | [XML]

Volume 17, Number 3 (2020-9)

Impact of Carbon Nanotubes Reinforcement on Microstructural and Tribological Characteristics of Air Plasma Sprayed Conventional Alumina-Titania (Al2O3-3wt%TiO2) Coatings
[Abstract-EN] | [PDF-EN] | [XML]
Fiber-matrix Adhesion on Industrial Geopolymer
[Abstract-EN] | [PDF-EN] | [XML]
Spectrophotometric Detection of Mercury Using Lignosulphonic Stabilized Silver Nanoparticles (AgNP)
[Abstract-EN] | [PDF-EN] | [XML]
Effect of Minor Amounts of Scandium on Recrystallization Behavior of 7000 series Aluminium
[Abstract-EN] | [PDF-EN] | [XML]
Investigation on Microstructure Evolution of a Semi-Austenitic Stainless Steel Through Hot Deformation
[Abstract-EN] | [PDF-EN] | [XML]
The Wear Behavior of a Cast Al-20wt%Mg2Si Composite Thixoformed Via SIMA
[Abstract-EN] | [PDF-EN] | [XML]
Microstructure-Property Relationships in an Erbium-Modified Al-Si-Mg Alloy
[Abstract-EN] | [PDF-EN] | [XML]
Significant Increase in Strength and Elongation of Al-3.7 Cu-1Mg Alloy Via Short Age Treatment Cycle
[Abstract-EN] | [PDF-EN] | [XML]
BenefIciation of an Oolitic-Iron ORE by Magnetization Roasting and Magnetic Separation
[Abstract-EN] | [PDF-EN] | [XML]
Synthesis and Characterization of Mercuric Sulfide Nanoparticles Thin Films by Pulsed Laser Ablation (PLA) in Distilled Water (DW)
[Abstract-EN] | [PDF-EN] | [XML]
High Strength Pyroxene-Based Glass- Ceramic Foams in the Presence of Fe2O3
[Abstract-EN] | [PDF-EN] | [XML]

Volume 17, Number 2 (2020-6)

Effect of ZrSiO4/ZnO Ratio on the Properties of Opaque Glazes Used in -Ceramic Sanitary-ware Industry
[Abstract-EN] | [PDF-EN] | [XML]
The Effect of Powder Composition on Cyclic Oxidation Behavior of CO-Deposited Al-Si Cating on Nickle-Based Superalloy
[Abstract-EN] | [PDF-EN] | [XML]
Quantum Dots in Therapeutic, Diagnostic and Drug Delivery Applications “A Brief Review”
[Abstract-EN] | [PDF-EN] | [XML]
Formation of Porous Poly(tetrafluoroethylene) Using a Partially Gasified Porogen
[Abstract-EN] | [PDF-EN] | [XML]
Chsracterization of Low Temperature Plasma Ion Nitriding (PIN) of Inconel 600 and 601 Alloys
[Abstract-EN] | [PDF-EN] | [XML]
Preparation of a Mesoporous Ceramic Adsorbent Based on Iranian Domestic Kaolin to Utilize as Slow-Release Urea Fertilizer Medium
[Abstract-EN] | [PDF-EN] | [XML]
Confined/Unconfined Crystallization of Poly(3-Hexylthiophene) in Melt/Solution Environments Containing Carbonic Materials and Correlated Thermal and Structural Behaviors
[Abstract-EN] | [PDF-EN] | [XML]
The Foaming Process of Poly Styrene-Co-Acrylonitrile (SAN) with Co Blowing Agents
[Abstract-EN] | [PDF-EN] | [XML]
A Substantial Red and Blue Shift in the Band Gap of Gamma Alumina Through Controlling the OH/Al and Concentration of Sulfate Precursor
[Abstract-EN] | [PDF-EN] | [XML]
Investigating the Leaching Behavior of Copper from Chalcopyrite Concentrate in H2SO4/CuCl2 Media
[Abstract-EN] | [PDF-EN] | [XML]
Theoretical Investigation and Optimization of Radiation Thermal Conduction of Thermal-Insulation Polyolefin Foams
[Abstract-EN] | [PDF-EN] | [XML]
Effect of Heat Treatment on Formation of Calcium Titanate Hollow-Crystals Nanostructures Prepared by Hydrothermal Method
[Abstract-EN] | [PDF-EN] | [XML]

Volume 17, Number 1 (2020-3)

A Review on Fabrication Methods, Characterization and Applications of Magnetic Iron Oxide Nanomaterials
[Abstract-EN] | [PDF-EN] | [XML]
Effect of Microstructure on Stress Dependence of Transformation Induced Plasticity in TRIP800 Low-alloy Multiphase Steels
[Abstract-EN] | [PDF-EN] | [XML]
Hot Deformation of the Mn-Ni-Cr Alloy During Compression
[Abstract-EN] | [PDF-EN] | [XML]
The Effect of Different Heat Treatment Procedures on Duplex Stainless Steel Microstructures and Electrochemical Properties
[Abstract-EN] | [PDF-EN] | [XML]
Prediction of Silicon Direct Nitridation Kinetic By An Efficient and Simple Predictive Model Based on Group Method of Data Handling
[Abstract-EN] | [PDF-EN] | [XML]
Fabrication of SiNWs/PEDOT:PSS Heterojunction Solar Cells
[Abstract-EN] | [PDF-EN] | [XML]
High Temperature Tensile Behavior of A356-TiB2/TiC in-situ Composites
[Abstract-EN] | [PDF-EN] | [XML]
Thermochemical Heat Storage Properties of Mechanical Activated Co3O4-5 wt. % Al2O3 and Co3O4-5 wt. % Y2O3 Composite Powders
[Abstract-EN] | [PDF-EN] | [XML]
Preparation and Characterization of Nanostructured Titania-coated Silica Microsphere Membranes with Simultaneous Photo-catalytic and Separation Applications for Water Treatment
[Abstract-EN] | [PDF-EN] | [XML]
Resistance of Alkali-activated Slag Cement Against Sodium Sulfate
[Abstract-EN] | [PDF-EN] | [XML]
Investigating the First-Order Flotation Kinetics Models for Iranian Gilsonite
[Abstract-EN] | [PDF-EN] | [XML]
Tailoring Microstructure and Mechanical Properties of Nano/ultrafine Grained AA6063 Alloy Processed by Accumulative Roll Bonding Process
[Abstract-EN] | [PDF-EN] | [XML]

Volume 16, Number 4 (2019-12)

Effect of ZR Content on Oxide-Scale Spallation of Aluminide Coating
[Abstract-EN] | [PDF-EN] | [XML]
Preparation and Investigation of Photo Catalytic Activity and Antibacterial Properties of TiO2/GO Thin Film
[Abstract-EN] | [PDF-EN] | [XML]
Sintering Behavior of Lithium Meta Titanate Nanocrystallites
[Abstract-EN] | [PDF-EN] | [XML]
Simulated Porcelain Firing of CO-CR Alloy
[Abstract-EN] | [PDF-EN] | [XML]
Microstructure and Hardness Evaluation of Magnesium Samples Processed by a New Design of Spread Extrusion Method
[Abstract-EN] | [PDF-EN] | [XML]
Ball Milling and Post Annealing as an Effective Route to Synthesize Co1-xCuxSbS Paracostibite Thermoelectric Material
[Abstract-EN] | [PDF-EN] | [XML]
Effect of the La2O3 Addition on Thermal, Microstructure and Mechanical Properties of Mullite–Zirconia Composites
[Abstract-EN] | [PDF-EN] | [XML]
Chemical Interaction Between MgO Support and Iron Catalyst
[Abstract-EN] | [PDF-EN] | [XML]

Volume 16, Number 3 (2019-9)

Synthesis oF Fe-TiC Hard Coating From Ilmenite via Laser Cladding
[Abstract-EN] | [PDF-EN] | [XML]
Theoretical and Experimental Investigation of Optical Properties of ZnS Zig-Zag Thin Films
[Abstract-EN] | [PDF-EN] | [XML]
Modelling Temperature Dependency of Silicon Nitride Formation Kinetic during Reaction Bonded Method
[Abstract-EN] | [PDF-EN] | [XML]
Evaluation of Simultaneous Effect of Melt Filtration and Cooling Rate on Tensile Properties of A356 Cast Alloy
[Abstract-EN] | [PDF-EN] | [XML]
Effect of Strain Induced Martensite on the Deep Drawing Behavior of 304L Steel: Simulation and Experiment
[Abstract-EN] | [PDF-EN] | [XML]
Effect of Welding Parameters in the Microstructure and Mechanical Properties of Friction-Welded Joints of 100Cr6 Steel
[Abstract-EN] | [PDF-EN] | [XML]
Evaluation of Mechanical and Thermal Properties of Polypropylene Modified with Nanostructured ZSM-5 Zeolite
[Abstract-EN] | [PDF-EN] | [XML]
Effect of Heat Treatment on the Microstructure and Soft Magnetic Properties of the Amorphous Fe-B-P-Cu Alloy
[Abstract-EN] | [PDF-EN] | [XML]

Volume 16, Number 2 (2019-6)

The Assessment of Second Pulse Effects on the Microstructure and Fracture Behavior of the Resistance Spot Welding in Advanced Ultrahigh-Strength Steel TRIP1100
[Abstract-EN] | [PDF-EN] | [XML]
Effect of Mechanical Activation on the Kinetics of Ammoniacal Thiosulfate Leaching of a Refractory Oxide Gold Ore
[Abstract-EN] | [PDF-EN] | [XML]
Processing and Characterization of AA2024/Al2O3/SiC Reinforces Hybrid Composites Using Squeeze Casting Technique
[Abstract-EN] | [PDF-EN] | [XML]
Synthesis of Boron-Aluminum Nitride Thin Film by Chemical Vapour Deposition Using Gas Bubbler
[Abstract-EN] | [PDF-EN] | [XML]
Influence of Multiple Coating and Heat Treatment Cycles on the Performance of Nano-TiO2 Coating in Protection of 316L Stainless Steel against Corrosion under UV Illumination and Dark Conditions
[Abstract-EN] | [PDF-EN] | [XML]
Effect OF SI and AL on the Microstructure, Mechanical Properties and Machinability of 65CU-35ZN Brass
[Abstract-EN] | [PDF-EN] | [XML]
Effect of Substrate Bias Voltage and Ti Doping on the Tribological Properties of DC Magnetron Sputtered MoSx Coatings‌
[Abstract-EN] | [PDF-EN] | [XML]
Physico-Mechanical Properties of Organo-Modified Bentonite Reinforced Cement Mortars
[Abstract-EN] | [PDF-EN] | [XML]

Volume 16, Number 1 (2019-3)

Effect of Casting Diameter and Heat Treatment Process on Microstructural Evolution and Mechanical Properties of Fe55-XCr18Mo7B16C4NbX(X=0,3) Ribbons and Nanostructured Rods
[Abstract-EN] | [PDF-EN] | [XML]
Structural and Electric Properties of the Ru0.9M0.1Sr2GdCu2O8 System with M = Zr, Mo, and Mn
[Abstract-EN] | [PDF-EN] | [XML]
Microstructural Investigation into Premature Failure of Compressor Turbine (CT) Blade Material of High Pressure (HP) PT6A-114A Engine
[Abstract-EN] | [PDF-EN] | [XML]
Hydrothermal Synthesis of Cobalt- Doped Hydroxyapatite Nanoparticles: Structure, Magnetic Behaviour, Bioactivity and Antibacterial Activity
[Abstract-EN] | [PDF-EN] | [XML]
Separation of Petroleum Coke from Anode Stubs Produced During the Aluminum Electrolysis
[Abstract-EN] | [PDF-EN] | [XML]
Influence of Deposition Temperature as a Reducing Agent on Synthesis of Reduced Graphene Oxide (RGO) Nanosheets
[Abstract-EN] | [PDF-EN] | [XML]
Finite Element Analysis to Investigate the Influence of Delamination Size, Stacking Sequence and Boundary Conditions on the Vibration Behavior of Composite Plate
[Abstract-EN] | [PDF-EN] | [XML]
The Effects of ZnO Additive on Sintering Behavior, Microstructural Evolution and Microwave Dielectric Properties of Li2TiO3 Ceramics
[Abstract-EN] | [PDF-EN] | [XML]

Volume 15, Number 4 (2018-12)

Full Analysis of All Composite Patch Repairing Design Parameters
[Abstract-EN] | [PDF-EN] | [XML]
Microstructure and Mechanical Behavior of As Cast and Hot Extruded AlZnMgCu Alloy with Rare Earth Erbium Additions
[Abstract-EN] | [PDF-EN] | [XML]
Interfacial Phases and Defects Characteristics of Al/Cu-Zn Bimetal Produced via Centrifugal Casting Process
[Abstract-EN] | [PDF-EN] | [XML]
Experimental Study to Optimize Shrinkage Behavior of Semi-Crystalline and Amorphous Thermoplastics
[Abstract-EN] | [PDF-EN] | [XML]
Dielectric Poperties and AC Conductivity Studies of PTh-Co Nanocomposites
[Abstract-EN] | [PDF-EN] | [XML]
Investigation of Microstructure, and Dry Sliding Wear of Hardfaced Layers Produced by FCAW Using Cored Wire Fe-B-C-Ti Alloy
[Abstract-EN] | [PDF-EN] | [XML]
Structural and Conductivity Studies of PAN-based Al2O3 Nano Composite Gel Polymer Electrolytes
[Abstract-EN] | [PDF-EN] | [XML]
Effects of Natural Aging Treatment on Mechanical, Microstructural and Forming Properties of Al 2024 Aluminum Alloy Sheets
[Abstract-EN] | [PDF-EN] | [XML]

Volume 15, Number 3 (2018-9)

Solvation Behavior of Gold Nanorods in Water: A Monte Carlo Simulation Study
[Abstract-EN] | [PDF-EN] | [XML]
L16 Orthogonal Design Synthesis of NASICON-type Li1.4Al0.4Ti1.6(PO4)3 Solid Electrolyte by Pechini Method for Process Optimization
[Abstract-EN] | [PDF-EN] | [XML]
Thermal Stability and Kinetics of Sodium Alginate and Lignosulphonic Acid Blends
[Abstract-EN] | [PDF-EN] | [XML]
Structural and Optoelectrical Properties of Single Phase SnS2 Thin Films at Various Substrate Temperatures by Spray Pyrolysis
[Abstract-EN] | [PDF-EN] | [XML]
The Failiur Analysis of Nb-Microalloyed δ-TRIP Steel
[Abstract-EN] | [PDF-EN] | [XML]
Thickness Dependence of Structural and Optical Properties of CdTe Films
[Abstract-EN] | [PDF-EN] | [XML]
Growth Inhibitory Effect of Oven Dried Copper Nanoparticles(CUNPS) on Drug Resistant Clinical Isolates
[Abstract-EN] | [PDF-EN] | [XML]
A Study on the Nanoscale Austenite Stabilized by Q&P Heat Treatment in a Low-alloy Medium-carbon Steel
[Abstract-EN] | [PDF-EN] | [XML]

Volume 15, Number 2 (2018-6)

The Hardness Behaviour of TIG Welded AL6061 Alloy Using Statistical Tool
[Abstract-EN] | [PDF-EN] | [XML]
Effect of Wet and Dry Conditions on Wear Behavior of Amorphous Coating of Fe-Cr-Mo-Nb-C-B
[Abstract-EN] | [PDF-EN] | [XML]
Cation Distribution Tuning of Solution Combusted CoFe2O4 Powders
[Abstract-EN] | [PDF-EN] | [XML]
Electrodeposition and Characterization of Sn-Zn Alloy Coatings from Sulfate Based Baths
[Abstract-EN] | [PDF-EN] | [XML]
An Investigation on the Adsorption Behavior of a Mesoporous Silica Synthesized by a Surfactant-assisted Method in an Acidic Media
[Abstract-EN] | [PDF-EN] | [XML]
Modification of Primary Si Crystals and Fe-rich Intermetallics in LM28 Al Alloy Fabricated Through Thixoforming
[Abstract-EN] | [PDF-EN] | [XML]
Effect of Calcination Kinetics and Microwave Sintering Parameters on Dielectric and Peizo-Electric Properties of(K0.5Na0.5) NBO3 Ceramics
[Abstract-EN] | [PDF-EN] | [XML]
Properties of Cement Pastes Doped with Very High Amounts of Ground Granulated Blast-furnace Slag
[Abstract-EN] | [PDF-EN] | [XML]

Volume 15, Number 1 (2018-3)

On the Characteristics of Friction Stir Welding Lap Joint of Magnesium and Aluminum
[Abstract-EN] | [PDF-EN] | [XML]
Microstructure and Crystallographic Texture Characterization of Friction Stir Welded Thin AA2024 Aluminum Alloy
[Abstract-EN] | [PDF-EN] | [XML]
Finite Element Studies on Friction Stir Welding Processes of Polyethylene Plates
[Abstract-EN] | [PDF-EN] | [XML]
Effect of Equal Channel Angular Pressing and Annealing Treatment on the Evolution of Microstructure in AlMg0.7Si Aluminum Alloy
[Abstract-EN] | [PDF-EN] | [XML]
Determination of Optical Properties in Germanium Carbon Coatings Deposited by Plasma Enhanced Chemical Vapor Deposition
[Abstract-EN] | [PDF-EN] | [XML]
Effect of P2O5 on Crystallization Behavior and Chemical Resistance of Dental Glasses in the Li2O-SiO2-ZrO2 System
[Abstract-EN] | [PDF-EN] | [XML]
Comprehensive Analysis on the Effect of Deep Cryogenic Treatment on The Mechanical Behaviour of Martensitic Valve steel
[Abstract-EN] | [PDF-EN] | [XML]
Temperature Distribution of Particles in a Laser Beam
[Abstract-EN] | [PDF-EN] | [XML]

Volume 14, Number 4 (2017-12)

EFFECTS OF THE HARDENED NICKEL COATING ON THE FATIGUE BEHAVIOR OF CK45 STEEL: EXPERIMENTAL, FINITE ELEMENT METHOD, AND ARTIFICIAL NEURAL NETWORK MODELING
[Abstract-EN] | [PDF-EN] | [XML]
FEM SIMULATION OF NON-AXISYMMETRIC STRETCH FLANGE FORMING OF ALUMINUM ALLOY 5052 BASED ON SHELL TYPE ELEMENTS
[Abstract-EN] | [PDF-EN] | [XML]
SYNTHESIS, MICROSTRUCTURE AND MECHANICAL PROPERTIES OF Mg - 5Zn - 0.3Ca/nHA NANOCOMPOSITES
[Abstract-EN] | [PDF-EN] | [XML]
ELECTROCHEMICAL AND THERMODYNAMIC ESTIMATIONS OF THE INTERACTION PARAMETERS FOR BULK AND NANO-SILVER NITRATE (NSN) WITH CEFDINIR DRUG USING A GLASSY CARBON ELECTRODE
[Abstract-EN] | [PDF-EN] | [XML]
CORROSION INHIBITION OF COPPER IN ACID MEDIUM BY DRUGS: EXPERIMENTAL AND THEORETICAL APPROACHES
[Abstract-EN] | [PDF-EN] | [XML]
EFFECT OF POST-DEFORMATION ANNEALING TREATMENT ON INTERFACE PROPERTIES AND SHEAR BOND STRENGTH OF Al-Cu BIMETALLIC RODS PRODUCED BY EQUAL CHANNEL ANGULAR PRESSING
[Abstract-EN] | [PDF-EN] | [XML]
ON THE FORMATION OF STRAY GRAINS IN DIRECTIONALLY-SOLIDIFIED NI-BASED SUPERALLOYS WITH VARYING CROSS SECTIONS
[Abstract-EN] | [PDF-EN] | [XML]
STRUCTURAL AND IONIC CONDUCTIVITYSTUDIES ONPLASTICIZED PAN-SODIUM FLUORIDE POLYMER ELECTROLYTES FOR ELECTROCHEMICAL CELL APPLICATIONS
[Abstract-EN] | [PDF-EN] | [XML]

Volume 14, Number 3 (2017-9)

EFFECTS OF MO ADDITION ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF CAST MICROALLOYED STEEL
[Abstract-EN] | [PDF-EN] | [XML]
THE KINETIC AND MECHANISM OF CRYSTALLIZATION OF MGGEO3 IN 65GEO2-15PBO-10MGF2-10MGO GLASS SYSTEM
[Abstract-EN] | [PDF-EN] | [XML]
INFLUENCE OF SURFACE NANO/ULTRAFINE STRUCTURE ACHIEVED BY DEEP ROLLING PROCESS ON PLASMA NITRIDING AND TRIBOLOGICAL PROPERTIES OF THE AISI 316L STAINLESS STEEL
[Abstract-EN] | [PDF-EN] | [XML]
SIMPLE SOLID STATE SYNTHESIS OF NANOSTRUCTURED AG6MO10O33 AND NI-SUBSTITUTED AG6MO10O33 POLYOXOMETALATES WITH PHOTOCATALYTIC CHARACTERISTIC
[Abstract-EN] | [PDF-EN] | [XML]
A COMPARATIVE STUDY ON CHARACTERISTICS OF DYNAMIC OXIDE FILM OF MOLTEN Zn-Al ALLOYS
[Abstract-EN] | [PDF-EN] | [XML]
EFFECT OF SHORT HEAT TREATMENT ROUTES ON THE TRIBOLOGICAL PROPERTIES OF TI-6AL-4V ALLOY
[Abstract-EN] | [PDF-EN] | [XML]
USE OF TITANIUM AND TUNGSTEN AS AN ALTERNATIVE TO GOLD IN JEWELLERY MANUFACTURING
[Abstract-EN] | [PDF-EN] | [XML]
EXPERIMENTAL POLYMERIC NANOCOMPOSITE MATERIAL SELECTION FOR AUTOMOTIVE BUMPER BEAM USING MULTI-CRITERIA DECISION MAKING METHODS
[Abstract-EN] | [PDF-EN] | [XML]

Volume 14, Number 2 (2017-6)

THE EFFECT OF VARIOUS PARAMETERS ON DRY SLIDING WEAR BEHAVIOR AND SUBSURFACE OF AGED HYBRID METAL MATRIX COMPOSITES USING TAGUCHI TECHNIQUE
[Abstract-EN] | [PDF-EN] | [XML]
CHARACTERIZATION OF CO-FE MAGNETIC FILMS FABRICATED BY GALVANO-STATIC ELECTRODEPOSITION
[Abstract-EN] | [PDF-EN] | [XML]
PREDICTING THE STIFFNESS OF BIAXIAL BRAIDED FIBER COMPOSITES BY INCORPORATION OF CARBON NANO FIBER
[Abstract-EN] | [PDF-EN] | [XML]
APPLIED OF IMPRESSED CURRENT CATHODIC PROTECTION DESIGN FOR FUEL PIPELINE NETWORK AT NAVAL BASE
[Abstract-EN] | [PDF-EN] | [XML]
MICROSTRUCTURE AND MECHANICAL PROPERTIES OF THE ULTRAFINE-GRAINED COPPER TUBE PRODUCED BY SEVERE PLASTIC DEFORMATION
[Abstract-EN] | [PDF-EN] | [XML]
DIFFUSION LAYER GROWTH MECHANISM IN ASPN METHOD USING AN IRON CAGE FOR ST52 STEEL
[Abstract-EN] | [PDF-EN] | [XML]
THE EFFECTS OF PLASMA SPRAY PARAMETERS ON THE MICROSTRUCTURE AND PHASE COMPOSITION OF THERMAL BARRIER COATINGS MADE BY SPPS PROCESS
[Abstract-EN] | [PDF-EN] | [XML]
EXPERIMENTAL AND THEORETICAL STUDY OF THE STRUCTURAL, MAGNETIC AND ELECTRONIC PROPERTIES OF THE BA2GDSBO6 PEROVSKITE
[Abstract-EN] | [PDF-EN] | [XML]

Volume 14, Number 1 (2017-3)

THE ROLE OF METAL ION ON PHYSIOCHEMICAL PROPERTIES OF METAL ALUMINATES PREPARED BY IMPREGNATION METHOD
[Abstract-EN] | [PDF-EN] | [XML]
SURFACE HARDENING OF TUNGSTEN-BASED HEAVY ALLOY VIA PACK BORONIZING
[Abstract-EN] | [PDF-EN] | [XML]
HIGH TEMPERATURE TENSILE PROPERTIES OF NEW FE-CR-MN DEVELOPED STEEL
[Abstract-EN] | [PDF-EN] | [XML]
EFFECT OF THE INCLINED COOLING PLATE CHARACTERISTICS ON THE THIXOTROPIC MICROSTRUCTURE OF A356.0 ALUMINUM ALLOY
[Abstract-EN] | [PDF-EN] | [XML]
SYNTHESIS OF AL2O3-NI COMPOSITE POWDERS BY CO-PRECIPITATION METHOD
[Abstract-EN] | [PDF-EN] | [XML]
COMPARATIVE MAGNETIC AND PHOTOCATALYTIC PROPERTIES OF COPRECIPITATED ZINC FERRITE NANOPARTICLES BEFORE AND AFTER CALCINATION
[Abstract-EN] | [PDF-EN] | [XML]
INFLUENCE OF MECHANICAL ALLOYING AND LEAD CONTENT ON MICROSTRUCTURE, HARDNESS AND TRIBOLOGICAL BEHAVIOR OF 6061 ALUMINIUM ALLOYS
[Abstract-EN] | [PDF-EN] | [XML]
THE FEASIBILITY STUDY OF W-Cu COMPOSITE PRODUCTION BY SUBMICRON PARTICLES ADDITION AND INFILTRATION
[Abstract-EN] | [PDF-EN] | [XML]

Volume 13, Number 4 (2016-12)

REMOVAL OF ORGANIC DYES FROM CONTAMINATED WATER USING COFE2O4 /REDUCED GRAPHENE OXIDE NANOCOMPOSITE
[Abstract-EN] | [PDF-EN] | [XML]
INVESTIGATING THE RELATIONSHIP BETWEEN HEAT OF HYDRATION AND PHYSICO-MECHANICAL PROPERTIES OF CALCIUM SULFATE HEMIHYDRATE IN THE PRESENCE OF ADDITIVES
[Abstract-EN] | [PDF-EN] | [XML]
FINITE ELEMENT SIMULATION OF HEAT TRANSFER IN FRICTION STIR WELDING OF AL 7050
[Abstract-EN] | [PDF-EN] | [XML]
SYNTHESIS OF FUNCTIONALLY GRADED Al LM25/ZIRCONIA COMPOSITE AND ITS SLIDING WEAR CHARACTERIZATION USING RESPONSE SURFACE METHODOLOGY
[Abstract-EN] | [PDF-EN] | [XML]
THE EFFECT OF NANO METER SIZE ZRO2 PARTICLES ADDITION ON THE DENSIFICATION AND HYDRATION RESISTANCE OF MAGNESITE– DOLOMITE REFRACTORIES
[Abstract-EN] | [PDF-EN] | [XML]
INVESTIGATING SELECTIVE REMOVAL OF Cr(VI) AND Zinc IONS FROM AQUEOUS MEDIA BY MECHANICAL-CHEMICAL ACTIVATED RED MUD
[Abstract-EN] | [PDF-EN] | [XML]
DENDRITE FRAGMENTATION IN THE SHEARED MELT BY FATIGUE EROSION MECHANISM OF SEMISOLID Al-Si ALLOY (A.356.0
[Abstract-EN] | [PDF-EN] | [XML]
CHARACTERIZATION OF MICRO/NANO POROUS HOLLOW GLASS MICROSPHERES FABRICATED THROUGH VARIOUS CHEMICAL ETCHING PROCESSE FOR USE IN SMART COATINGS
[Abstract-EN] | [PDF-EN] | [XML]

Volume 13, Number 3 (2016-9)

RECOVERY OF IRON FROM LOW-GRADE HEMATITE ORE USING COAL-BASED DIRECT REDUCTION FOLLOWED BY MAGNETIC SEPARATION
[Abstract-EN] | [PDF-EN] | [XML]
A QUICK ROUTE FOR THE SYNTHESIS OF PMN-PZT POWDERS
[Abstract-EN] | [PDF-EN] | [XML]
MODELING THE HOT DEFORMATION FLOW CURVES OF API X65 PIPELINE STEEL USING THE POWER LAW EQUATION
[Abstract-EN] | [PDF-EN] | [XML]
ELECTROPHORETIC DEPOSITION OF TIO2-MULTI-WALLED CARBON NANOTUBE COMPOSITE COATINGS: MORPHOLOGICAL STUDY
[Abstract-EN] | [PDF-EN] | [XML]
THE EFFECT OF SEVERE PLASTIC DEFORMATION ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF AS-CAST AZ31
[Abstract-EN] | [PDF-EN] | [XML]
ELECTROCHEMICAL INVESTIGATION OF INHIBITORY OF NEW SYNTHESIZED TETRAZOLE DERIVATIVE ON CORROSION OF STAINLESS STEEL 316L IN ACIDIC MEDIUM
[Abstract-EN] | [PDF-EN] | [XML]
THE EFFECT OF TEMPERATURE AND MAGNESIUM SIZE ON LOW TEMPERATURE MAGNESIOTHERMIC SYNTHESIS OF NANO STRUCTURES BORON CARBIDE BY MESOPOROUS CARBON (CMK-1)
[Abstract-EN] | [PDF-EN] | [XML]
CORROSION INHIBITIVE PROPERTIES OF EXTRACT OF JATROPHA CURCAS LEAVES ON MILD STEEL IN HYDROCHLORIC ACID ENVIRONMENT
[Abstract-EN] | [PDF-EN] | [XML]

Volume 13, Number 2 (2016-6)

WEAR RATE PREDICTION OF GRINDING MEDIA USING BPNN AND MLR MODELS IN GRINDING OF SULPHIDE ORES
[Abstract-EN] | [PDF-EN] | [XML]
EXPERIMENTALl ANALYSIS OF PARTITION COEFFICIENT IN Al-Mg ALLOYS
[Abstract-EN] | [PDF-EN] | [XML]
ThE EFFECT OF METAKOLIN, MICROSILICA AND NANOSILICA ON THE MECHANICAL PROPERTIES AND MICROSTRUCTURE OF CEMENT MORTAR
[Abstract-EN] | [PDF-EN] | [XML]
CORROSION RESISTANT SOL–GEL COATING ON 2024-T3 ALUMINUM
[Abstract-EN] | [PDF-EN] | [XML]
INVESTIGATING THE fFORMATION OF INTERMETALLIC COMPOUNDS AND THE VARIATION OF BOND STRENGTH BETWEEN Al-Cu LAYERS AFTER ANNEALING IN PRESENCE OF NICKEL BETWEEN LAYERS
[Abstract-EN] | [PDF-EN] | [XML]
FABRICATION AND CHARACTERIZATION OF POLYANILINE-GRAPHENE COMPOSITE AS ELECTRODE IN ELECTROCHEMICAL CAPACITOR
[Abstract-EN] | [PDF-EN] | [XML]
EVALUATION OF PRECIPITATION HARDENING HEAT TREATMENT OF PH 17-7 STAINLESS STEEL SPRING
[Abstract-EN] | [PDF-EN] | [XML]
IN SITU FABRICATION OF Al 2024-Mg2Si COMPOSITE BY SPARK PLASMA SINTERING OF REACTIVE MECHANICALLY ALLOYED POWDER
[Abstract-EN] | [PDF-EN] | [XML]
SHEET ELECTROMAGNETIC FORMING USING CONVEX PUNCH INSTEAD OF CONVAVE DIE
[Abstract-EN] | [PDF-EN] | [XML]

Volume 13, Number 1 (2016-3)

ON THE REACTIONS IN ILMENITE, ALUMINUM AND GRAPHITE SYSTEM
[Abstract-EN] | [PDF-EN] | [XML]
LEAD-FREE BNKT PIEZOELECTRIC ACTUATOR
[Abstract-EN] | [PDF-EN] | [XML]
INVESTIGATION ON GROWTH AND CHARACTERIZATION OF NONLINEAR OPTICAL DICHLORO-DIGLYCINE ZINC II SINGLE CRYSTAL
[Abstract-EN] | [PDF-EN] | [XML]
EFFECT OF RHODIUM INFILTRATION ON THE MICROSTRUCTURE AND PERFORMANCE OF Ni/Ce0.8Gd0.2O2-δ CERMET ANODE FOR LOW TEMPERATURE SOLID OXIDE FUEL CELL
[Abstract-EN] | [PDF-EN] | [XML]
THE EFFECT OF OPACIFIERS ON SURFACE ROUGHNESS OFCERAMIC GLAZES
[Abstract-EN] | [PDF-EN] | [XML]
CHARACTERIZATION OF SHORT E-GLASS FIBER REINFORCEDGRAPHITE AND BRONZE FILLED EPOXY MATRIX COMPOSITES
[Abstract-EN] | [PDF-EN] | [XML]
EFFECT OF PH CHANGES ON PHASE CONSTITUENTS, MICROSTRUCTURE AND MAGNETIC PROPERTIES OF NANO-SIZED NiFe2O4 POWDER SYNTHESIZED BY SOL–GEL AUTO-COMBUSTION METHOD
[Abstract-EN] | [PDF-EN] | [XML]
SYNTHESIS AND CORROSION PROTECTION BEHAVIOR OF EPOXYTiO2-MICACEOUS IRON OXIDE NANO - COMPOSITE COATING ON St-37
[Abstract-EN] | [PDF-EN] | [XML]
SYNTHESIS AND STUDY OF CORROSION PERFORMANCE OF EPOXY COATING CONTAINING MULTI-WALLED CARBON NANOTUBE/ POLY ORTHO AMINOPHENOL NANOCOMPOSITE
[Abstract-EN] | [PDF-EN] | [XML]

Volume 12, Number 4 (2015-12)

MICROWAVE SYNTHESIS OF B4C–Al2O3 COMPOSITE IN A MECHANICALLY ACTIVATED Al/B2O3/C POWDER MIXTURE
[Abstract-EN] | [PDF-EN] | [XML]
EFFECTS OF A MODIFIED SIMA PROCESS ON THE STRUCTURE, HARDNESS AND MECHANICAL PROPERTIES OF Al-12Zn-3Mg-2.5Cu ALLOY
[Abstract-EN] | [PDF-EN] | [XML]
EFFECT OF CHANNEL ANGLE AND FRICTION IN MODIFIED ECAP-CONFORM PROCESS OF Al-6061: A NUMERICAL STUDY
[Abstract-EN] | [PDF-EN] | [XML]
EFFECT OF COOLING RATE AND GRAIN REFINEMENT ON THE MICROSEGREGATION IN Al-4.8 wt.% Cu ALLOY
[Abstract-EN] | [PDF-EN] | [XML]
EVALUATION OF FORGING PARAMETERS ON AL-7075 AIRCRAFT DOOR BRACKET BY SIMULATION
[Abstract-EN] | [PDF-EN] | [XML]
EFFECT OF SiC ADDITION ON HYDROGEN DESORPTION PROPERTIES OF NANOCRYSTALLINE MgH2 SYNTESIZED BY MECHANICAL ALLOYING
[Abstract-EN] | [PDF-EN] | [XML]
CORROSION BEHAVIOR OF 6063 ALUMINUM ALLOY IN ETHYLENE GLYCOL-WATER SOLUTION
[Abstract-EN] | [PDF-EN] | [XML]
CREEP AGE FORMING OF Al-Zn-Mg ALLOYS WITH OPTIMIZATION OF MECHANICALl PROPERTIES
[Abstract-EN] | [PDF-EN] | [XML]
Si/ZnO NANO STRUCTURED HETEROJUNCTIONS BY APCVD METHOD
[Abstract-EN] | [PDF-EN] | [XML]
MICROSTRUCTURE CHARACTERISTIC OF ALUMINUM TITANATE SYNTHESIED BY BOTH SOLID- STATE AND SOL-GEL PROCESSES
[Abstract-EN] | [PDF-EN] | [XML]
THE EFFECT OFCARBON NANOTUBES ON THE SINTERING BEHAVIOR OF ZIRCONIA BASED MATERIALS
[Abstract-EN] | [PDF-EN] | [XML]

Volume 12, Number 3 (2015-9)

EFFECT OF HIGH TEMPERATURE OXIDATION ON THE CORROSION BEHAVIOR OF ALUMINIZED LOW CARBON STEEL IN MOLTEN ALUMINUM
[Abstract-EN] | [PDF-EN] | [XML]
QUALITY CONTROL OF PRECIPITATION HARDENED ALUMINIUM ALLOY PARTS VIA EDDY-CURRENT NONDESTRUCTIVE EVALUATION
[Abstract-EN] | [PDF-EN] | [XML]
SYNTHESIS OF MgAl2O4-Ti(C,N) NANOCOMPOSITE BY ALUMINOTHERMIC REDUCTION
[Abstract-EN] | [PDF-EN] | [XML]
THE EFFECT OF VOLATILE MATTER OF NON-COKING COAL ON THE REDUCTION OF IRON OXIDE AT NON-ISOTHERMAL CONDITION
[Abstract-EN] | [PDF-EN] | [XML]
MICROSTRUCTURAL STUDIES OF Ti-REFINED Al2014 ALLOY PREPARED BY SIMA PROCESS
[Abstract-EN] | [PDF-EN] | [XML]
EFFECT OF A FOURTH COMPONENT (Na2O, SrO, MgO AND BaO) ADDITION TO CaO-Al2O3-SiO2 SYNTHETIC SLAG ON SULFUR REMOVAL FROM PLAIN CARBON STEEL
[Abstract-EN] | [PDF-EN] | [XML]
PREPARATION OF Fe/GLASS COMPOSITE BY REDUCTION OF Na2O– Fe2O3–B2O3–SiO2–ZnO GLASS AND GLASS CERAMICS
[Abstract-EN] | [PDF-EN] | [XML]
AN INVESTIGATION ON FATIGUE AND FATIGUE CORROSION BEHAVIOR OF Cr-Si SPRING STEEL AFTER Zn-Ni ELECTROPLATING USING WEIBULL STATISTICAL MODEL
[Abstract-EN] | [PDF-EN] | [XML]
SIMULATION AND MONITORING OF THE MACHINING PROCESS VIA FUZZY LOGIC AND CUTTING FORCES
[Abstract-EN] | [PDF-EN] | [XML]
CORRELATION BETWEEN CRYSTAL ORIENTATION AND NANOGAP FORMED BY ELECTRO MIGRATION
[Abstract-EN] | [PDF-EN] | [XML]

Volume 12, Number 2 (2015-6)

EFFECT OF ANODIC OXIDATION ON THE CORROSION BEHAVIOR OF NICKEL-TITANIUM SHAPE MEMORY ALLOYS IN SIMULATED BODY FLUIDS (SBF)
[Abstract-EN] | [PDF-EN] | [XML]
A DETAILED STUDY TOWARD THE NANO -CRYSTALLIZATION OF α – Fe IN Fe55-X Cr18Mo7B16C4 BULK AMORPHOUS ALLOY
[Abstract-EN] | [PDF-EN] | [XML]
COMPARISON OF MECHANICAL AND ELECTRICAL PROPERTIES OF PIEZOELECTRIC COMPOSITES PZT/ZnO AND PZT/Al FABRICATED BY POWDER METALLURGY
[Abstract-EN] | [PDF-EN] | [XML]
MECHANO-THERMAL REDUCTION OF HEMATITE AND ANATASE MIXTURE BY TWO DIFFERENT FORMS OF CARBON AS REDUCTANT FOR IN-SITU PRODUCTION OF Fe-T iC - NANO CRYSTALLINE COMPOSITE
[Abstract-EN] | [PDF-EN] | [XML]
COMPARISON OF PROPERTIES OF TiN/TiCN AND PLASMA NITRIDING/TiCN FILMS DEPOSITED ON THE TOOL STEEL BY PULSED DC- PACVD
[Abstract-EN] | [PDF-EN] | [XML]
CORROSION INHIBITION BEHAVIOR OF N,N′-BIS(2,4,6-TRIHYDROXYACETOPHENONE)-PROPANDIIMINE ON ST44.0 STEEL IN ALKALINE NACL SOLUTION
[Abstract-EN] | [PDF-EN] | [XML]
FEASIBILITY OF PRODUCING NANO STRUCTURED METALLIC AND NON-METALLIC COATINGS ON Al SUBSTRATE USING MECHANICAL COATING ROUTE
[Abstract-EN] | [PDF-EN] | [XML]
EFFECT OF T6 HEAT TREATMENT ON MECHANICAL PROPERTIES OF CERAMIC REINFORCED CASTED ALUMINUM ALLOY
[Abstract-EN] | [PDF-EN] | [XML]
AN INVESTIGATION ON CORROSION BEHAVIOUR OF A356-10 VOL.% SiC COMPOSITES IN HCl SOLUTIONS
[Abstract-EN] | [PDF-EN] | [XML]
THE EFFECT OF CTAB SURFACTANT ADDITION AND ADDITIONAL Sr ON PHASE FORMATION AND MAGNETIC PROPERTIES OF NANOSIZED SrFe12O19 SYNTHESIZED VIA SOL-GEL AUTO- COMBUSTION METHOD
[Abstract-EN] | [PDF-EN] | [XML]

Volume 12, Number 1 (2015-3)

CRYSTALLOGRAPHIC, MORPHOLOGICAL AND W-H MODELS INVESTIGATIONS ON Mn SUBSTITUTED ZnO NANOCRYSTALS
[Abstract-EN] | [PDF-EN] | [XML]
ALUMINOTHERMIC-CARBOTHERMAL REDUCTION SYNTHESIS OF NANO CRYSTALLINE Al2O3-Ti(C,N) COMPOSITE WITH DIFFERENT BED TYPES
[Abstract-EN] | [PDF-EN] | [XML]
SYNTHESIS OF NANO SIZED MESOPOROUS γ - Al2O3POWDER FROM DOMESTIC HAMEDAN KAOLIN
[Abstract-EN] | [PDF-EN] | [XML]
PREDICTION OF CRITICAL STRESS AND STRAIN FOR THE ONSET OF DYNAMIC RECRYSTALLIZATION IN PLAIN CARBON STEELS
[Abstract-EN] | [PDF-EN] | [XML]
COMPARISON OF THE CrN , TiN AND (Ti, Cr)N PVD COATINGS DEPOSITED BY CATHODIC ARC EVAPORATION
[Abstract-EN] | [PDF-EN] | [XML]
EFFECT OF CURRENT DENSITY ON MICROSTRUCTURE AND CORROSION BEHAVIOR OF PURE COBALT COATINGS OBTAINED
[Abstract-EN] | [PDF-EN] | [XML]
COMBUSTION PERFORMANCE OF Ni-COATED AND UNCOATED HIGH ENERGETIC ALUMINUM NANOPARTICLES
[Abstract-EN] | [PDF-EN] | [XML]
SIMULATION OF NICKEL ELECTROFORMING PROCESS OF A REVOLVING PART USING FINITE ELEMENT METHOD
[Abstract-EN] | [PDF-EN] | [XML]
ESTIMATION OF GAS HOLDUP AND INPUT POWER IN FROTH FLOTATION USING ARTIFICIAL NEURAL NETWORK
[Abstract-EN] | [PDF-EN] | [XML]
INTRAPLY HYBRID COMPOSITES BASED ON BASALT AND NYLON WOVEN FABRICS: TENSILE AND COMPRESSIVE PROPERTIES
[Abstract-EN] | [PDF-EN] | [XML]

Volume 11, Number 4 (2014-12)

FRACTIONAL RECRYSTALLIZATION KINETICS IN DIRECTLY COLD ROLLED Al-Mg, Al-Mg-Sc AND Al-Mg-Sc-Zr ALLOY
[Abstract-EN] | [PDF-EN] | [XML]
SPREAD DATA ANALYSIS OF ALUMINUM OXIDE SPLATS REINFORCED WITH CARBON NANOTUBES
[Abstract-EN] | [PDF-EN] | [XML]
MODELING HIGH TEMPERATURE FLOW BEHAVIOR OF AN AL 6061 ALUMINIUM ALLOY
[Abstract-EN] | [PDF-EN] | [XML]
TO EVALUATE THE APPLICABILITY OF ALKOXIDE SOL-GEL METHOD IN SYNTHESIS OF YSZ NANOPOWDER THROUGH APPROPRIATE HYDROLYSIS ROUTE
[Abstract-EN] | [PDF-EN] | [XML]
EFFECTS OF CU AND SOLUTION HEAT TREATMENT ON THE MICROSTRUCTURE AND HARDNESS OF IN-SITU ALUMINIUM MATRIX COMPOSITE CONTAINING AL4SR PHASE
[Abstract-EN] | [PDF-EN] | [XML]
EFFECT OF FABRICATION PARAMETERS ON SYNTHESIS OF Ti2AlC AND Ti3AlC2MAX PHASES BY MASHS
[Abstract-EN] | [PDF-EN] | [XML]
PRESSURELESS SINTERING OF B4C-NANOTiB2 NANOCOMPOSITE BY ADDITION OF Fe AND Ni AS SINTERING AIDS
[Abstract-EN] | [PDF-EN] | [XML]
DEVELOPMENT OF HARDNESS IN A Fe- BASED NANO-COMPOSITE ALLOY
[Abstract-EN] | [PDF-EN] | [XML]
PHASE STABILITY AND SEMICONDUCTING BEHAVIOUR OF LOW ACTIVATION AUSTENITIC MN-CR STEELS
[Abstract-EN] | [PDF-EN] | [XML]
THE FORMATION OF TiAl3 DURING HEAT TREATMENT IN EXPLOSIVELY WELDED Ti-Al MULTILAYERS
[Abstract-EN] | [PDF-EN] | [XML]
EFFECT OF NICKEL AND COBALT ADDITIONS ON INFILTRATION BEHAVIOR, MICROSTRUCTURE AND HARDNESS OF W-AG COMPOSITES
[Abstract-EN] | [PDF-EN] | [XML]
EFFECT OF TiO2 ADDITION ON BONDING STRENGTH OF CaO-P2O5 Na2O-TiO2 BIOACTIVE GLASS CERAMIC COATING
[Abstract-EN] | [PDF-EN] | [XML]

Volume 11, Number 3 (2014-9)

THE EFFECT OF CRYOLITE NA3ALF6 AND SODIUM FLUORIDE NAF ON THE CORROSION AND WETTING BY MOLTEN AL-SI ALLOY OF ANDALUSITE BASED REFRACTORIES
[Abstract-EN] | [PDF-EN] | [XML]
DENSIFICATION AND MICROSTRUCTURE CHARACTERISTICS OF A PREALLOYED ALPHA BRASS POWDER PROCESSED BY LIQUID PHASE SINTERING
[Abstract-EN] | [PDF-EN] | [XML]
INKJET DEPOSITED SILVER NANOPARTICLE ELECTRODES
[Abstract-EN] | [PDF-EN] | [XML]
THE EFFECT OF COBALT ADDITIVE ON MICROSTRUCTURE AND PROPERTIES OF W-CU COMPOSITES PREPARED BY SINTERING AND INFILTRATION PROCESSES
[Abstract-EN] | [PDF-EN] | [XML]
INFLUENCE OF CARBON ON THE AGEING BEHAVIOUR OF TI-13V-11CR-3AL
[Abstract-EN] | [PDF-EN] | [XML]
EFFECT OF ZrO2 PARTICLE SIZE ON MORPHOLOGY and SYNTHESIS OF NANO CaZrO3Via MOLTEN SALT METHOD
[Abstract-EN] | [PDF-EN] | [XML]
STUDY ON NIOBIUM CARBIDE COATING FORMATION ON AISI L2 STEEL USING THERMO-REACTIVE DEPOSITION METHOD
[Abstract-EN] | [PDF-EN] | [XML]
STUDY OF CHARACTERIZATION AND CORROSION RESISTANCE OF NIP/NANO-DIAMOND ELECTROLESS COMPOSITE DEPOSITION
[Abstract-EN] | [PDF-EN] | [XML]
EFFECTS OF ELECTRO-SLAG REMELTING PROCESS (ESR) ON MACROSTRUCTURE AND REFINEMENT OF A MEDICAL GRADE OF STAINLESS STEEL
[Abstract-EN] | [PDF-EN] | [XML]
INFLUENCE OF THE PREPARATION METHOD ON THE STRUCTURE,PHASE FORMATION AND MAGNETIC PROPERTIES OF TEMPLATED CUFE2O4 SPINEL
[Abstract-EN] | [PDF-EN] | [XML]

Volume 11, Number 2 (2014-6)

HEAT TREATMENT AND OPTICAL SPECTROSCOPY OF CR4+:GGG FOR PASSIVELY Q-SWITCHING ND:GARNET LASERS
[Abstract-EN] | [PDF-EN] | [XML]
FABRICATION OF A “CONE PAA NANOSTRUCTURE” BY GRADUAL DECREASE OF VOLTAGE
[Abstract-EN] | [PDF-EN] | [XML]
EFFECT OF IMMERSION TIME ON THE ELECTROCHEMICAL BEHAVIOUR OF AISI 321 STAINLESS STEEL IN 0.1 M H2SO4 SOLUTION
[Abstract-EN] | [PDF-EN] | [XML]
EFFECT OF SPIRAL DESIGN ON CRYSTAL ORIENTATION DURING SINGLE CRYSTAL GROWTH
[Abstract-EN] | [PDF-EN] | [XML]
KINETIC STUDIES FOR GOLD LEACHING OF A REFRACTORY SULFIDE CONCENTRATE BY CHLORIDE–HYPOCHLORITE SOLUTION
[Abstract-EN] | [PDF-EN] | [XML]
INVESTIGATING THE CORROSION BEHAVIOR OF NANO STRUCTURED COPPER STRIP PRODUCED BY ACCUMULATIVE ROLL BONDING (ARB) PROCESS IN ACIDIC CHLORIDE ENVIRONMENT
[Abstract-EN] | [PDF-EN] | [XML]
EFFECT OF CERAMIC FOAM FILTERS ON OXIDES REMOVAL AND THE TENSILE PROPERTIES OF A-356 ALLOY CASTINGS
[Abstract-EN] | [PDF-EN] | [XML]
EFFECT OF ANNEALING ON MICROSTRUCTURE AND CORROSION PERFORMANCE OF ADB AND ALB ALLOYS
[Abstract-EN] | [PDF-EN] | [XML]

Volume 11, Number 1 (2014-3)

THE EFFECT OF NANO BIOGLASS ON THE FABRICATION OF POROUS TITANIUM SCAFFOLDS
[Abstract-EN] | [PDF-EN] | [XML]
THE EFFECT OF PROCESSING PARAMETERS ON SOL GEL SYNTHESIS OF β-SiC NANO POWDER
[Abstract-EN] | [PDF-EN] | [XML]
A PARAMETRIC STUDY ON THE SULFURIC ACID LEACHING OF VANADIUM OF AN IRANIAN THERMAL POWER PLANT ASH
[Abstract-EN] | [PDF-EN] | [XML]
INVESTIGATION OF TRIBOLOGICAL CHARACTERISTICS OF AL/NANO SiO2NANOCOMPOSITES PRODUCED BY ACCUMULATIVE ROLL BONDING (ARB) PROCESS
[Abstract-EN] | [PDF-EN] | [XML]
DISLOCATIONS STRUCTURE AND SCATTERING PHENOMENON IN CRYSTALLINE CELL SIZE OF 2024 AL ALLOY DEFORMED BY ONE PASS OF ECAP AT ROOM TEMPERATURE
[Abstract-EN] | [PDF-EN] | [XML]
EFFECT OF CONTROLLED QUENCHING ON THE AGING OF 2024 ALUMINUM ALLOY CONTAINING BORON
[Abstract-EN] | [PDF-EN] | [XML]
MECHANICAL CHARACTERIZATION AND ANALYSIS OF RANDOMLY DISTRIBUTED SHORT BANANA FIBER REINFORCED EPOXY COMPOSITES
[Abstract-EN] | [PDF-EN] | [XML]

Volume 10, Number 4 (2013-12)

MODELING AND OPTIMIZING THE CORROSIVE WEAR OF STEEL BALLS IN BALL GRINDING MILL
[Abstract-EN] | [PDF-EN] | [XML]
STUDY ON CORROSION BEHAVIOR OF COBALT NANO COMPOSITE COATINGS
[Abstract-EN] | [PDF-EN] | [XML]
COMPARATIVE STUDY OF CORROSION INHIBITION EFFICIENCY OF NATURALLY OCCURRING ECOFRIENDLY VARIETIES OF HOLY BASIL (TULSI) FOR TIN IN HNO3 SOLUTION
[Abstract-EN] | [PDF-EN] | [XML]
ELECTROCHEMICAL BEHAVIOUR OF AISI 304 STAINLESS STEEL IN SULFURIC SOLUTION: EFFECTS OF ACID CONCENTRATION
[Abstract-EN] | [PDF-EN] | [XML]
A KINETIC STUDY ON THE CARBOTHERMIC REDUCTION OF ZINC OXIDE FROM ELECTRIC ARC FURNACE DUST
[Abstract-EN] | [PDF-EN] | [XML]
DETERMINATION OF THE OPTIMUM CONDITIONS FOR RECOVERY OF GOLD FROM ZARSHURAN REFRACTORY GOLD SULFIDE ORE
[Abstract-EN] | [PDF-EN] | [XML]
NANOCRYSTALLIZATION MECHANISMS OF Fe52Cr18Mo7B16C4Nb3 BULK AMORPHOUS STEEL
[Abstract-EN] | [PDF-EN] | [XML]

Volume 10, Number 3 (2013-9)

EFFECTS OF HOT ISOSTATIC PRESSING ON THE TENSILE PROPERTIES OF A356 CAST ALLOY
[Abstract-EN] | [PDF-EN] | [XML]
INITIAL SINTERING KINETICS OF LITHIUM META TITANATE AT CONSTANT RATES OF HEATING
[Abstract-EN] | [PDF-EN] | [XML]
INVESTIGATION OF MICROSTRUCTURAL AND MECHANICAL PROPERTIES OF 7075 AL ALLOYPREPARED BY SIMA METHOD
[Abstract-EN] | [PDF-EN] | [XML]
EFFECT OF COMPOSITION AND MILLING TIME ON THE SYNTHESIS OF NANOSTRUCTURED Ni-Cu ALLOYS BY MECHANICAL ALLOYING METHOD
[Abstract-EN] | [PDF-EN] | [XML]
STUDY THE WEAR MECHANISM OF A PLASMA ELECTROLYTIC NITROCARBURISED (PEN/C) 316L AUSTENITIC STAINLESS STEEL
[Abstract-EN] | [PDF-EN] | [XML]
AN INVESTIGATION ON EFFECT OF BOND COAT REPLACEMENT ON HOT CORROSION PROPERTIES OF THERMAL BARRIER COATINGS
[Abstract-EN] | [PDF-EN] | [XML]
THERMAL ANALYSIS AND KINETICS OF THE PRECIPITATION IN WROUGHT Al-Mg, Al-Mg-ScAND Al-Mg-Sc-Me (Me=Zr, Ti) ALLOYS
[Abstract-EN] | [PDF-EN] | [XML]

Volume 10, Number 2 (2013-6)

SYNTHESIS AND PROPERTIES OF MWCNT-HAP COMPOSITES VIA SOL-GEL TECHNIQUE
[Abstract-EN] | [PDF-EN] | [XML]
THE EFFECT OF ADDING TiO2 NANOPARTICLES ON DENTAL AMALGAM PROPERTIES
[Abstract-EN] | [PDF-EN] | [XML]
CATION UPTAKE PROPERTIES OF CALCIUM ALUMINOSILICATE
[Abstract-EN] | [PDF-EN] | [XML]
INVESTIGATION NITRIDE LAYERS AND PROPERTIES SURFACES ON PULSED PLASMA NITRIDED HOT WORKING STEEL AISI H13
[Abstract-EN] | [PDF-EN] | [XML]
EFFECT OF AUSTENITE GRAIN MORPHOLOGY ON VARIANT SELECTION OF MARTENSITE TRANSFORMED FROM ULTRAFINE-GRAINED AUSTENITE
[Abstract-EN] | [PDF-EN] | [XML]
EFFECT OF HEAT INPUT ON THE STRUCTURE AND PROPERTIES OF ALUMINIUM WELDMENT
[Abstract-EN] | [PDF-EN] | [XML]
INFLUENCE OF HEAT TREATMENT PARAMETERS,TEMPERATURE AND TIME, ON WEAR AND MICROHARDNESS OF NICRBSI FLAME SPRAYED COATINGS APPLIED ON CK45 SUBSTRATES
[Abstract-EN] | [PDF-EN] | [XML]

Volume 10, Number 1 (2013-3)

PROPERTIES OF ALKALI-ACTIVATED FLY ASH CONCRETE BLENDED WITH SLAG
[Abstract-EN] | [PDF-EN] | [XML]
THE EFFECT OF APPLIED VOLTAGE AND Mg CONTENT OF THE SUBSTRATE ON THE MICROSTRUCTURE AND CORROSION PERFORMANCE OF THE ANODIZED AL WITH PEO TECHNIQUE
[Abstract-EN] | [XML]
STUDY OF ANNEALING TEMPERATURE VARIATION ON THE STRUCTURAL PROPERTIES OF DIP-COATED TiO2-SiO2 NANOSTRUCTURED FILMS
[Abstract-EN] | [PDF-EN] | [XML]
COMPARATIVE STUDY ON PROPERTIES OF NANOSTRUCTURED TITANIA SYNTHESIZED BY COLLOIDAL AND POLYMERIC SOLGEL ROUTES
[Abstract-EN] | [PDF-EN] | [XML]
CRYSTALLIZATION AND SINTERABILITY BEHAVIOR OF BIORESORBABLE CaO-P2O5-Na2O-TiO2 GLASS CERAMICS FOR BONE REGENERATION APPLICATION
[Abstract-EN] | [PDF-EN] | [XML]
CORROSION BEHAVIOR OF ELECTROLESS Ni-P/NANOZnO COATINGS
[Abstract-EN] | [PDF-EN] | [XML]
EFFECTS OF TiO2 ADDITIVE ON ELECTROCHEMICAL HYDROGEN STORAGE PROPERTIES OF NANOCRYSTALLINE /AMORPHOUS Mg2Ni INTERMETALLIC ALLOY
[Abstract-EN] | [PDF-EN] | [XML]

Volume 9, Number 4 (2012-12)

PRODUCTION OF TiAl/Al2O3 AND TiAl/Ti2AlC/Al2O3 COMPOSITES BY EXPLOSION SYNTHESIS
[Abstract-EN] | [PDF-EN] | [XML]
EFFECT OF CALCINATION TEMPERATURE OF THE KAOLIN AND MOLAR Na2O/SiO2 ACTIVATOR RATIO ON PHYSICAL AND MICROSTRUCTURAL PROPERTIES OF METAKAOLIN BASED GEOPOLYMERS
[Abstract-EN] | [PDF-EN] | [XML]
IMPROVING PITTING CORROSION OF 304 STAINLESS STEEL BY ELECTROPOLISHING TECHNIQUE
[Abstract-EN] | [PDF-EN] | [XML]
A RESEARCH ON THE CALCULATION OF GRAPHITIZATION ABILITY OF GRAY CAST IRONS
[Abstract-EN] | [PDF-EN] | [XML]
SYNERGISTIC INFLUENCE OF NITRITE ON INHIBITION OF MILD STEEL CORROSION IN CHLORIDE CONTAMINATED ALKALINE SOLUTION
[Abstract-EN] | [PDF-EN] | [XML]
EFFECTS OF Al-5TI-1B MASTER ALLOY AND HEAT TREATMENT ON THE MICROSTRUCTURE AND DRY SLIDING WEAR BEHAVIOR OF AN Al-12Zn-3Mg-2.5Cu ALLOY
[Abstract-EN] | [PDF-EN] | [XML]
EFFECT OF PARTICLES CONCENTRATION AND CURRENT DENSITY ON THE COBALT/HEXAGONAL BORON NITRIDE NANO-COMPOSITE COATINGS PROPERTIES
[Abstract-EN] | [PDF-EN] | [XML]

Volume 9, Number 3 (2012-9)

An Experimental and Theoretical Investigation of Corrosion Mechanism in a Metallic Stack
[Abstract-EN] | [PDF-EN] | [XML]
Montmorillonite modified as an efficient and environment friendly catalyst for one- pot synthesis of 3, 4-dihydropyrimidine-2(1H) ones
[Abstract-EN] | [PDF-EN] | [XML]
Manufacture of Aluminum Closed-cell Foam by ARB process using CaCO3 as the blowing agent
[Abstract-EN] | [PDF-EN] | [XML]
Heat Treatment Of Cobalt-Base Alloy Surgical Implants With Hydroxyapatite-Bioglass For Surface Bioactivation
[Abstract-EN] | [PDF-EN] | [XML]
VISIBLE-LIGHT-ACTIVE NITROGEN DOPED TIO2 NANOPARTICLES PREPARED BY SOL-GEL ACID CATALYZED REACTION
[Abstract-EN] | [PDF-EN] | [XML]
Cooling rate optimization of as-cast consciously cast steel
[Abstract-EN] | [PDF-EN] | [XML]

Volume 9, Number 2 (2012-6)

ANALYTICAL DATA FOR NiO REDUCTION AND Al3Ni2 INTERMETALLIC COMPOUND FORMATION
[Abstract-EN] | [PDF-EN] | [XML]
INFLUENCE OF NANO SILICA ON PROPERTIES AND MICROSTRUCTURE OF HIGH ALUMINA ULTRA-LOW CEMENT REFRACTORY CASTABLES
[Abstract-EN] | [PDF-EN] | [XML]
EFFECT OF NANO SiC ADDITIVE ON MCMB-SiC COMPOSITE FABRICATION VIA MOLTEN SILICON INFILTRATION
[Abstract-EN] | [PDF-EN] | [XML]
COMPOSITION DEPENDENCE OF SPECTROSCOPIC PROPERTIES AND TRANSPARENCY OF SiO2-TiO2-Na2O GLASS IN 200-1100 nm
[Abstract-EN] | [PDF-EN] | [XML]
A THEORETICAL STUDY OF ZEOLITE ABW: ITS MECHANICAL AND AUXETIC PROPERTIES.
[Abstract-EN] | [PDF-EN] | [XML]
DRILL WEAR PREDICTION SYSTEM USING OF MOTOR CURRENT AND FUZZY LOGIC METHOD
[Abstract-EN] | [PDF-EN] | [XML]
EFFECT OF SUBSTRATE TEXTURE AND DEPOSITION CURRENT DENSITY ON PROPERTIES OF NiNANOCRYSTALLINE ELECTRODEPOSITS
[Abstract-EN] | [PDF-EN] | [XML]

Volume 9, Number 1 (2012-3)

SUSPENSION STABILITY OF TITANIA NANOPARTICLES STUDIED BY UV-VIS SPECTROSCOPY METHOD
[Abstract-EN] | [PDF-EN] | [XML]
GROWTH OF ZnS SINGLE CRYSTALS BY CVT TECHNIQUE UNDER DIFFERENT MASS TRANSPORT STABILITY CONDITIONS
[Abstract-EN] | [PDF-EN] | [XML]
THE INFLUENCE OF DRY SLIDING ON PRCIPITATION HARDENING BEHAVIORS OF Al-Cu-Si ALLOY
[Abstract-EN] | [PDF-EN] | [XML]
A NEW MATHEMATICAL MODELING OF CONTACT TREATMENT BETWEEN AN ORTHOTROPIC MATERIAL AND A RIGID INDENTER
[Abstract-EN] | [PDF-EN] | [XML]
AN INVESTIGATION ON THE EFFECT OF ELECTROMAGNETIC FORCE ON THE CHARACTERISTICS OF ELECTRODEPOSITED Ni/Al2O3 COMPOSITE COATINGS
[Abstract-EN] | [PDF-EN] | [XML]
EVALUATION OF PRESSURE EFFECT ON HEAT TRANSFER COEFFICIENT AT THE METAL- MOLD INTERFACE FOR CASTING OF A356 AL ALLOY
[Abstract-EN] | [PDF-EN] | [XML]
EFFECT OF REFINING PROCESS ON POROSITY AND MECHANICAL PROPERTIES OF HIGH PRESSURE AL-SI ALLOY DIE CASTINGS
[Abstract-EN] | [PDF-EN] | [XML]

Volume 8, Number 4 (2011-12)

EFFECT OFACID ACTIVATION ON STRUCTURALAND BLEACHING PROPERTIES OFABENTONITE
[Abstract-EN] | [PDF-EN] | [XML]
EFFECTS OFVARIOUS NUCLEATION AGENTS ON CRYSTALLIZATION KINETIC OFLAS GLASS CERAMIC
[Abstract-EN] | [PDF-EN] | [XML]
IMPROVING HYDRATION RESISTANCE OF MAGNESIA-DOLOMA REFRACTORIES BYIRON OXIDE ADDITION
[Abstract-EN] | [PDF-EN] | [XML]
MECHANICALAND METALLURGICAL PROPERTIES OFWIDE-GAP ALUMINOTHERMIC RAILWELDS
[Abstract-EN] | [PDF-EN] | [XML]
HEATTREATMENTEFFECTS ON NON-THERMALSOL-GELDRIVED MESOPOROUS TiO2/SiO2
[Abstract-EN] | [PDF-EN] | [XML]
INVESTIGATING THE LINEAR EXPANSION, SET, AND STRENGTH BEHAVIORS OF THE BINARY MIXTURE PORTLAND CEMENT CLINKER-GYPSUM
[Abstract-EN] | [PDF-EN] | [XML]
EFFECT OF SCANDIUM ON THE GRAIN REFINING AND AGEING BEHAVIOUR OFCASTAl-Si-MgALLOY
[Abstract-EN] | [PDF-EN] | [XML]

Volume 8, Number 3 (2011-9)

INVESTIGATING SHRINKAGE CHANGES OF NATURAL POZZOLAN BASED GEOPOLYMER CEMENTPASTE
[Abstract-EN] | [PDF-EN] | [XML]
BENEFICIATION STUDIES ON BAUXITE MINING WASTE: A VALUE ADDITION FOR REFRACTORYINDUSTRIES
[Abstract-EN] | [PDF-EN] | [XML]
MULLITE SYNTHESIS AND FORMATION FROM KYANITE CONCENTRATES IN DIFFERENT CONDITIONS OF HEAT TREATMENT AND PARTICLE SIZE
[Abstract-EN] | [PDF-EN] | [XML]
LOW TEMPERATURE MOLTEN SALT SYNTHESIS OF NANO CRYSTALLINE MgAl2O4 POWDER
[Abstract-EN] | [PDF-EN] | [XML]
FABRICATION AND CHARACTERIZATION OFHIGH PERFORMANCE CERAMIC MEMBRANE HAVINGNANOMETRE PORES
[Abstract-EN] | [PDF-EN] | [XML]
NUMERICAL MODELING OF THE COMBUSTION SYNTHESIS OF TiAl/Al2O3 COMPOSITE VIAMICROWAVE HEATING
[Abstract-EN] | [PDF-EN] | [XML]
EFFECTOFTHE TYPE OFCARBON MATERIALON THE REDUCTION KINETICS OFBARIUM SULFATE
[Abstract-EN] | [PDF-EN] | [XML]

Volume 8, Number 2 (2011-6)

PARTICLE SIZE CHARACTERIZATION OF NANOPARTICLES – A PRACTICALAPPROACH
[Abstract-EN] | [PDF-EN] | [XML]
SYNTHESIS AND CHARACTERIZATION OFSILICON CARBIDE NANO POWDER BYSOLGELPROCESSING
[Abstract-EN] | [PDF-EN] | [XML]
STUDY OF THICKNESS DEPENDENT CHARACTERICTICS OF Cu2S THIN FILM FOR VARIOUS APPLICATIONS
[Abstract-EN] | [PDF-EN] | [XML]
MECHANICAL PROPERTIES OF DENTAL COMPOSITE MATERIALS REINFORCED WITH MICRO AND NANO-SIZE Al2O3 FILLER PARTICLES
[Abstract-EN] | [PDF-EN] | [XML]
MAGNESIUM PRODUCTION FROM ASIAN ABE-GARM DOLOMITE IN PIDGEON-TYPE REACTOR
[Abstract-EN] | [PDF-EN] | [XML]
EFFECT OF SUPERSOLIDUS LIQUID PHASE SINTERING ON THE MICROSTRUCTURE AND DENSIFICATION OF THE Al-Cu-Mg PREALLOYED POWDER
[Abstract-EN] | [PDF-EN] | [XML]
PREPARATION OF NANO-STRUCTURAL Al2O3-TiB2 IN-SITU COMPOSITE USING MECHANICALLY ACTIVATED COMBUSTION SYNTHESIS FOLLOWED BYINTENSIVE MILLING
[Abstract-EN] | [PDF-EN] | [XML]

Volume 8, Number 1 (2011-3)

EFFECT OFMASS TRANSPORT STABILITYAND UNDERCOOLING ON NUCLEATION OF ZNS CRYSTALS IN CLOSED AMPOULE CVT
[Abstract-EN] | [PDF-EN] | [XML]
INVESTIGATING THE PHYSICAL AND MECHANICAL PROPERTIES OF HIGH-COPPER AND SILVER DENTAL-FILLING AMALGAM ALLOYS
[Abstract-EN] | [PDF-EN] | [XML]
MICROSTRUCTURE STUDY ON AL-5%SiC NANOCOMPOSITE POWDERS
[Abstract-EN] | [PDF-EN] | [XML]
MICROSTRUCTURE AND PROPERTIES OF COLLOIDAL SILICA BONDED MAGNESITE CASTABLE REFRACTORIES
[Abstract-EN] | [PDF-EN] | [XML]
PREPARATION OF NANO PORE MORDENITE MEMBRANES
[Abstract-EN] | [PDF-EN] | [XML]
INVESTIGATION OFELECTRICALAND MECHANICALPROPERTIES OFTETRAGONAL/CUBIC COMPOSITE ELECTROLYTES PREPARED BYIMPREGNATION OFCUBIC ZIRCONIAWITH ZIRCONIASOLUTION
[Abstract-EN] | [PDF-EN] | [XML]
KINETIC STUDY OF SYNTHESIS OF TITANIUM CARBIDE BY METHANOTHERMALREDUCTION OFTITANIUM DIOXIDE
[Abstract-EN] | [PDF-EN] | [XML]

Volume 7, Number 4 (2010-10)

EFFECTS OF TEMPERATURE AND AL-CONCENTRATION ON FORMATION MECHANISM OF AN ALUMINIDE COATING APPLIED ON SUPER ALLOY IN738LC THROUGH A SINGLE-STEP HIGH ACTIVITYGAS DIFFUSION PROCESS
[Abstract-EN] | [PDF-EN] | [XML]
THERMO-MECHANICAL DESIGN OPTIMIZATION OF CORDIERITE–MULLITE BASED KILN FURNITURE
[Abstract-EN] | [PDF-EN] | [XML]
FATIGUE BEHAVIOUR OFA ROLLED AZ31 MAGNESIUM ALLOYS PREPARED BY EPAND BB CONDITIONS
[Abstract-EN] | [PDF-EN] | [XML]
KINETICS OF -Fe NANOCRYSTALLIZATION IN Fe55Cr18Mo7B16C4 BULK AMORPHOUS ALLOY
[Abstract-EN] | [PDF-EN] | [XML]
COMPARISON OF ELECTRODEPOSITION ASPECTS AND CHARACTERISTICS OFNi-WAND Co-WALLOYNANOCRYSTALLINE COATINGS
[Abstract-EN] | [PDF-EN] | [XML]
THE EFFECT OF COMPLEX NUCLEATING AGENT ON THE PHYSICAL AND CHEMICAL PROPERTIES OF Li2O-Al2O3-SiO2 GLASS CERAMIC
[Abstract-EN] | [PDF-EN] | [XML]
EFFECTS OF CO-DEPOSITION OF CR2O3 AND MoS2 ON CORROSION PROPERTIES OF NANOCOMPOSITE ELECTROLESS NICKELCOATING
[Abstract-EN] | [PDF-EN] | [XML]

Volume 7, Number 3 (2010-8)

HYDROTHERMAL SYNTHESIS OF YTTRIUM ORTHOVANADATE (YVO4) AND ITS APPLICATION IN PHOTO CATALYTIC DEGRADATION OFSEWAGE WATER
[Abstract-EN] | [PDF-EN] | [XML]
INFLUENCE OF MAGNESIA ADDITION ON HYDRATION OF IRANIAN DOLOMITE
[Abstract-EN] | [PDF-EN] | [XML]
Numerical Modeling of Macrosegregation during the Direct-Chill Casting of an Al alloy Billet
[Abstract-EN] | [PDF-EN] | [XML]
Study of the effects of lower bainite volume fraction on tensile and impact properties of D6AC medium carbon low alloy ultrahigh strength steel
[Abstract-EN] | [PDF-EN] | [XML]
AN INVESTIGATION ON REACTIVE SINTERING OF NANO-CRYSTALLINE TiO2 -Al POWDER PREPARED BY MECHANICAL ALLOYING
[Abstract-EN] | [PDF-EN] | [XML]
The effects of anodizing condition and post treatment on the growth of nickel nanowires using Anodic Aluminum Oxide
[Abstract-EN] | [PDF-EN] | [XML]
Estimation of coal swelling index based on chemical properties of coal using artificial neural networks
[Abstract-EN] | [PDF-EN] | [XML]

Volume 7, Number 2 (2010-6)

STUDY ON ELECTROWINNING OF COBALT BY CYCLIC VOLTAMMETRYTECHNIQUE
[Abstract-EN] | [PDF-EN] | [XML]
EFFECT OF FUELS ON THE COMBUSTION SYNTHESIS OF NiAL2O4 SPINEL PARTICLES
[Abstract-EN] | [PDF-EN] | [XML]
EFFECT OF MECHANICAL ACTIVATION ON THE KINETICS OF LEACHINGOFCHALCOPYRITE IN THE FERRIC SULFATE MEDIA
[Abstract-EN] | [PDF-EN] | [XML]
EVALUATION OF THE MECHANICAL PROPERTIES OF NIOBIUM MODIFIED CAST AISI H 13 HOT WORK TOOL STEEL
[Abstract-EN] | [PDF-EN] | [XML]
THE EFFECT OF AGING TREATMENT ON MECHANICAL PROPERTIES OFAA6082 ALLOY: MODELINGAND EXPERIMENT
[Abstract-EN] | [PDF-EN] | [XML]
A STUDY ON THE ALUMINIZING OF ELECTRODEPOSITED NICKELAT 500 oC
[Abstract-EN] | [PDF-EN] | [XML]
NUMERICAL SIMULATION OF COMBUSTION SYNTHESIS OF ALUMINIDE INTERMETALLIC COMPOUNDS
[Abstract-EN] | [PDF-EN] | [XML]

Volume 7, Number 1 (2010-3)

THE GREEN SYNTHESIS OF GOLD NANOPARTICLES USING THE ETHANOL EXTRACT OF BLACK TEA AND ITS TANNIN FREE FRACTION
[Abstract-EN] | [PDF-EN] | [XML]
FORMATION OF GLOBULAR STRUCTURES IN ALUMINUM A356 ALLOY BY NARROWMELT STREAM (NMS) TECHNIQUE
[Abstract-EN] | [PDF-EN] | [XML]
EVALUATION OFDISLOCATION STRUCTURE AND CRYSTALLITE SIZE IN WORN AL-SI ALLOY BY X-RAY DIFFRACTION
[Abstract-EN] | [PDF-EN] | [XML]
FORMATION AND GROWTH OF TITANIUM ALUMINIDE LAYER AT THE SURFACE OF TITANIUM SHEETS IMMERSED IN MOLTEN ALUMINUM
[Abstract-EN] | [PDF-EN] | [XML]
A NEW GENERATION OF OXYNITRIDE GLASSES CONTAINING FLUORINE
[Abstract-EN] | [PDF-EN] | [XML]
THE EFFECT OF COOLING RATE AND AUSTENITE GRAIN SIZE ON THE AUSTENITE TO FERRITE TRANSFORMATION TEMPERATURE AND DIFFERENT FERRITE MORPHOLOGIES IN MICROALLOYED STEELS
[Abstract-EN] | [PDF-EN] | [XML]
EFFECT OF POLYVINYL ALCOHOL ON FLEXURAL STRENGTH AND SOME IMPORTANT PHYSICALPROPERTIES OFPORTLAND CEMENT PASTE
[Abstract-EN] | [PDF-EN] | [XML]

Volume 6, Number 4 (2009-12)

THE SHAKING TABLE CONCENTRATOR: INFLUENCE OF TABLE PARAMETERS ON MANGANESE CONCENTRATION
[Abstract-EN] | [XML]
PREDICTION OF STATIC SOFTENING OF MICROALLOYED STEEL BY THE INTEGRATION OF FINITE ELEMENT MODEL WITH PHYSICALLY BASED STATE VARIABLE MODEL
[Abstract-EN] | [XML]
Studies on the effect of mechanically activating ilmenite concentrate using an attritor on its subsequent iron removal potential and kinetics of dissolution in hydrochloric acid
[Abstract-EN] | [XML]
INFLUENCE OF THE PRIMARY SOLIDIFICATION ON THE SECONDARY SOLIDIFICATION DURING SEMISOLID METAL (SSM) PROCESSING OF A356.0 ALUMINUM ALLOY BY MECHANICAL STIRRING
[Abstract-EN] | [XML]
STUDY ON CORROSION PROPERTIES OF PLASMA NITRIDED PURE ALUMINIUM
[Abstract-EN] | [XML]
AN INVESTIGATION INTO THE EFFECT OF ECAE PROCESS ON MECHANICAL AND MICROSTRUCTURAL PROPERTIES OF MIDDLE LAYER IN COPPER CLAD ALUMINUM COMPOSITE
[Abstract-EN] | [XML]
A new approach to predict of mechanical properties at the interface of Aluminium/Copper explosive cladding by explosive scarf welding
[Abstract-EN] | [XML]

Volume 6, Number 3 (2009-9)

NANO- SCALE LOCALIZED CORROSION STUDIES OFEN AW- 3003ALALLOYBYSEM-EDS, SKPFM AND IN-SITU AFM
[Abstract-EN] | [XML]
COMPUTER AIDED OPTIMIZATION OF SPECIMEN GEOMETRY OF HOT TORSION TEST TO MINIMIZE MICROSTRUCTURE NONHOMOGENEITY AND TEMPERATURE GRADIENT BEFORE DEFORMATION
[Abstract-EN] | [XML]
INVESTIGATION OFPHYSICALAND MECHANICALPROPERTIESOFALNANOCOMPOSITE REINFORCED WITH CNTS
[Abstract-EN] | [XML]
THE OXIDATION RESISTANCE OF HIGH ALUMINUM HEAT RESISTANT STEELS
[Abstract-EN] | [XML]
MECHANISMS OFPRECIPITATES FORMATION IN AN Al- Cu- Li-ZrALLOYUSINGDSC TECHNIQUE AND ELECTRICALRESISTANCE MEASUREMENTS
[Abstract-EN] | [XML]
EFFECTOFROTATIONALSPEED (Ù) ON THE PARTICLES BREAK UPAND HARDNESS VALUES IN 2024-T851 FRICTION STIR WELDS
[Abstract-EN] | [XML]
PREPARATION OF FUNCTIONALIZED MWCNTS COATING WITH MgO VIA SIMPLE PRECIPITATION METHOD
[Abstract-EN] | [XML]

Volume 6, Number 2 (2009-6)

DESIGN AND FABRICATION OF A SOPHISTICATED VERNEUIL SYSTEM
[Abstract-EN] | [XML]
EFFECT OF GRAPHITE FLAKES ON THE MICROSTRUCTURE OF MELTED, TRANSITION AND HEAT AFFECTED ZONES IN GREY CAST IRON REMELTED BY TIG
[Abstract-EN] | [XML]
THE EFFECT OF GRINDING TIME ON THE SPECIFIC SURFACE AREA DURING INTENSIVE GRINDING OF MINERAL POWDERS
[Abstract-EN] | [XML]
PREPARATION AND SINTERING OF W-20%Wt Cu COMPOSITE POWDERS PRODUCED BY CO-PRECIPITATION METHOD
[Abstract-EN] | [XML]
ANOVELMONITORINGTECHNIQUE TO DEFINE CP CRITERIA FOR BURIED PIPELINES UNDER AC CORROSION CONDITION
[Abstract-EN] | [PDF-EN] | [XML]
VERY DEEP TRENCHES IN SILICON WAFER USING DRIE METHOD WITH ALUMINUM MASK
[Abstract-EN] | [XML]
APPLICATION OF FTIR-SPECTROSCOPY TECHNIQUE IN CHARACTERIZING MOLECULAR STRUCTURE OF NATURAL POZZOLAN-BASED GEOPOLYMER CEMENT
[Abstract-EN] | [XML]

Volume 6, Number 1 (2009-3)

Effect of Microstructure and mechanical properties of horizontal continuous cast pipe of CuZn40Al1 alloy
[Abstract-EN] | [XML]
Formation of a hybrid coating by the use of plasma nitriding and hard chromium electroplating on the surface of H11 hot work tool steel
[Abstract-EN] | [XML]
Mechanochemical synthesis of alumina nanoparticles
[Abstract-EN] | [XML]
A SURVEY ON THE EFFECT OF SOIL COMPOSITION IN CORROSION BEHAVIOR OF CATHODICALLY PROTECTED BURIED PIPELINES UNDER AC INDUCED CONDITION
[Abstract-EN] | [XML]
AGGLOMERATION ASSESMENT OF NANO-SIZED ALUMINA POWDERS
[Abstract-EN] | [XML]
Implementation of Combined Mechanical Activation and Thermal Analysis for Identification of Combustion Synthesis Mechanism in TiO2-Al -C System
[Abstract-EN] | [XML]
An Analysis on the Forming Characteristics of commercial pure Aluminum AA 1100 in Radial-Forward Extrusion Process
[Abstract-EN] | [XML]

Volume 5, Number 4 (2008-12)

STUDY ON VANADIUM CARBIDE COATING FORMATION ON AISI L2 STEEL BY THERMO-REACTIVE DEPOSITION TECHNIQUE
[Abstract-EN] | [PDF-EN] | [XML]
EFFECT OF SILICON CONTENT ON THE STRAIN HARDENING OF DUAL-PHASE STEELS
[Abstract-EN] | [XML]
SIGMA PHASE FORMATION IN A HEAT TREATED NI-50CR COATING APPLIED BY HVOF PROCESS ON A STAINLESS STEEL
[Abstract-EN] | [XML]
TRANSFORMATION BEHAVIOR OF NiTi SHAPE MEMORY ALLOYS TREATED BY THERMOMECHANICAL PROCESSING USING DSC
[Abstract-EN] | [XML]
SOLIDIFICATION MODELING AND DENDRITE STRUCTURE ANALYSIS IN A HORIZONTAL CONTINUOUSLY CAST BRASS BILLET
[Abstract-EN] | [XML]
NON-DESTRUCTIVE THERMAL DAMAGE CHARACTERIZATION OF CORDIERITE-MULLITE REFRACTORIES
[Abstract-EN] | [XML]
A T.E.M INVESTIGATION OF THE MECHANISM OF EARLY STAGE ORDERING IN THE INTERMETTALIC COMPOUND PT2FECU
[Abstract-EN] | [XML]

Volume 5, Number 3 (2008-9)

PHASE TRANSFORMATION DURING WEAR OF AISI STAINLESS STEEL 316
[Abstract-EN] | [XML]
EFFECT OF A CHLORIDE FLUX ON THE DISSOLUTION OF Mn-Al COMPACTS IN MOLTEN ALUMINUM
[Abstract-EN] | [XML]
FORMULATION AND PREPARATION OF A NOVEL DUST FREE FAST SETTING DENTAL ALGINATE IMPRESSION MATERIAL
[Abstract-EN] | [XML]
NEURAL NETWORK MODELING OF THE EFFECT OF COOLING SLOPE CASTING PARAMETERS ON PARTICLE SIZE OF PRIMARY SILICON CRYSTALS OF SEMISOLID CAST INGOTS OF Al-20Si (wt%)
[Abstract-EN] | [XML]
EFFECTS OF LANTHANUM DOPING ON THE ELECTRICAL PROPERTIES OF SOL-GEL DERIVED AND MECHANICALLY ACTIVATED Pb1.1- X LaX (Zr0.53Ti0.47) O3, NANO POWDERS
[Abstract-EN] | [XML]
AN EVALUATION OF THERMAL STABILITY IN DISSIMILAR WELDS BETWEEN 310 STAINLESS STEEL AND ALLOY 657
[Abstract-EN] | [XML]
THERMAL FATIGUE RESISTANCES OF 356 AND 413 CAST Al ALLOYS
[Abstract-EN] | [XML]

Volume 5, Number 2 (2008-6)

REFRACTORIES FOR BLACK LIQUOR GASIFICATION
[Abstract-EN] | [PDF-EN] | [XML]
EVALUATION OF SOLUTION COMBUSTION METHOD IN THE SYNTHESIS OF Fe-ZrSiO4 BASED CORAL PIGMENT
[Abstract-EN] | [PDF-EN] | [XML]
EFFECTS OF SILICA MODULUS AND ALKALI CONCENTRATION ON ACTIVATION OF BLAST-FURNACE SLAG
[Abstract-EN] | [PDF-EN] | [XML]
CHARACTERIZATION OF TRANSVERSE CRACK AND CRACK GROWTH IN A RAILWAY RAIL
[Abstract-EN] | [PDF-EN] | [XML]
THE INFLUENCE OF pH AND UV VISIBLE ABSORBTION ON HYDROLYSIS STAGE AND GEL BEHAVIOR OF GLASSES SYNTHESIZED BY SOL-GEL
[Abstract-EN] | [PDF-EN] | [XML]
TITANIUM ALUMINIDES SYNTHESIS BY ALUMINO-CALCIOTHERMIC REDUCTION OF TiO2
[Abstract-EN] | [PDF-EN] | [XML]
MODELING SURFACE TENSION AND WALL ADHESION IN MOLD FILLING PROCESS
[Abstract-EN] | [PDF-EN] | [XML]

Volume 5, Number 1 (2008-3)

INVESTIGATION ON SLAG-REFRACTORY INTERACTION IN LADLE USING COMPUTATIONAL TECHNIQUES
[Abstract-EN] | [XML]
INVESTIGATION ON THE MIXTURE OF CALCIUM AND AMMONIUM NITRATES AS STEEL CORROSION INHIBITOR IN SIMULATED CONCRETE PORE SOLUTION
[Abstract-EN] | [XML]
THE EFFECT OF HEAT TREATMENT ON ABRASIVE WEAR RESISTANCE OF Fe-34Cr-4.5C%WT HARDFACING ALLOY
[Abstract-EN] | [XML]
SOLID STATE REDUCTION OF CHROMITE IN HIGH CARBON FERROCHROMIUM-CHROMITE COMPOSITE PELLETS
[Abstract-EN] | [XML]
MECHANICAL AND CHEMICAL PROPERTIES OF SiO2-Al2O3-CaO-MgO (R2O) GLASS CERAMICS IN THE PRESENCE OF VARIOUS NUCLEATING AGENTS
[Abstract-EN] | [XML]
INVESTIGATION ON THE EFFECTS OF MAGNETIC FIELD ON BROMIDE-INDUCED PITTING OF COMMERCIALLY PURE TITANIUM
[Abstract-EN] | [XML]
ULTRA FINE FERRITE FORMATION IN Si-Mn TRIP STEELS
[Abstract-EN] | [XML]

Volume 4, Number 3 (2007-12)

HIGH TEMPERATURE ELASTIC PROPERTIES OF REFRACTORY MATERIALS
[Abstract-EN] | [XML]
A STUDY ON THE SPECIFIC RATE OF BREAKAGE OF IRON ORE OF SANGAN MINE IN A LABORATORY BALL MILL
[Abstract-EN] | [XML]
THE EFFECT OF GRAPHITE ADDITION ON CORROSION BEHAVIOR OF TAR BONDED DOLOMITE REFRACTORIES IN STEELMAKING CONVERTER
[Abstract-EN] | [XML]
DISSOLUTION KINETICS OF MANGANESE DIOXIDE ORE IN SULFURIC ACID IN THE PRESENCE OF FERROUS ION
[Abstract-EN] | [XML]
AN INFLUENCE OF PHASE DEVELOPMENT ON MECHANICAL STRENGTH OF ALUMINA-COPPER JOINT PREPARED BY MOLYMn METHOD
[Abstract-EN] | [XML]
DEVELOPMENT OF A TUNGSTEN HEAVY ALLOY, W-Ni-Mn, USED AS KINETIC ENERGY PENETRATOR
[Abstract-EN] | [XML]
AN INVESTIGATION ON THE PERFORMANCE OF AN IMIDAZOLINE BASED COMMERCIAL CORROSION INHIBITOR ON CO2 CORROSION OF GAS-WELL TUBING STEEL BY EIS TECHNIQUE
[Abstract-EN] | [XML]

Volume 4, Number 1 (2007-6)

LOW TEMPERATURE SYNTHESIS OF NANOCRYSTALLINE MgAl2O4 SPINEL VIA SUCROSE PROCESS
[Abstract-EN] | [XML]
NEURAL NETWORK PREDICTION OF THE EFFECT OF SEMISOLID METAL (SSM) PROCESSING PARAMETERS ON PARTICLE SIZE AND SHAPE FACTOR OF PRIMARY α-Al ALUMINUM ALLOY A356.0.
[Abstract-EN] | [XML]
EVALUATION OF WEAR AND IMPACT PROPERTIES OF GRINDING BALLS USED IN SARCHESHMEH COPPER PLANT
[Abstract-EN] | [XML]
DIRECT REDUCTION OF SARCHESHME COPPER SULFIDE CONCENTRATE WITH CARBON IN THE PRESENCE OF LIME
[Abstract-EN] | [XML]
STATIC RECRYSTALLIZATION BEHAVIOR OF A SiC - PARTICLE REINFORCED ALUMINUM ALLOY AFTER HOT DEFORMATION
[Abstract-EN] | [XML]
COMPARISON OF HIGH TEMPERATURE PROPERTIES AND THERMAL SHOCK OF AUSTEMPERED DUCTILE IRONS (ADI) WITH THOSE OF PEARLITIC DUCTILE CAST IRONS
[Abstract-EN] | [XML]
THEORETICAL AND EXPERIMENTAL EVALUATION OF DISLOCATION DENSITY IN A WORKPIECE AFTER FORMING
[Abstract-EN] | [XML]

Volume 3, Number 3 (2006-12)

FAILURE MECHANISMS OF REFRACTORY LININGS FOR NONFERROUS FLASH SMELTING FURNACES
[Abstract-EN] | [XML]
THREE DIMENSIONAL MODELING OF TURBULENT FLOW WITH FREE SURFACE IN MOLD FILLING
[Abstract-EN] | [XML]
THE EFFECT OF STRAINING BEFORE AND DURING AUSTENITE TO FERRITE TRANSFORMATION ON THE FINAL CHARACTERISTICS OF SI-MN TRIP STEELS
[Abstract-EN] | [XML]
EFFECT OF DIFFUSION ANNEALING ON PROPERTIES OF TI/304L STAINLESS STEEL EXPLOSION CLAD
[Abstract-EN] | [XML]
PREDICTION OF HOT DEFORMATION BEHAVIOUR OF A PH STAINLESS STEEL AT HIGH STRAIN RATES
[Abstract-EN] | [XML]
THE EFFECT OF TI CONTENTS ON THE AMOUNTS OF INCLUSIONS FORMATION AND MECHANICAL PROPERTIES OF C300 HIGH STRENGTH STEEL
[Abstract-EN] | [XML]
ELECTRODEPOSITION OF NANO SIZE HYDROXYAPATITE COATING ON TI ALLOY
[Abstract-EN] | [PDF-EN] | [XML]

Volume 3, Number 1 (2006-6)

NEW REFRACTORY MATERIALS FOR THE COPPER INDUSTRY
[Abstract-EN] | [XML]
WEAR REESISTANCE OF NANOSTRUCTURED AND CONVENTIONAL YTTRIA-STABILIZED ZIRCONIA COATINGS
[Abstract-EN] | [XML]
THE EFFECT OF MILLING CONDITIONS ON THE MECHANICAL ALLOYING AND COMBUSTION SYNTHESIS OF TIO2-AI-C POWDER MIXTURE
[Abstract-EN] | [XML]
HOT CRACK FORMATION IN PURE CU AND CU-30%ZN ALLOY DURING IN SITU SOLIDIFICATION
[Abstract-EN] | [XML]
EFFECTS OF TENSILE STRENGTH ON FATIGUE BEHAVIOR AND NOTCH SENSITIVITY OF TI-6AL-4V
[Abstract-EN] | [XML]
MICROSTRUCTURAL STUDY OF SILICON NITRIDE WHISKERS PRODUCED BY NITRIDATION OF PLASMA-SPRAYED SILICON LAYERS
[Abstract-EN] | [XML]
THE EFFECT OF RAW MATERIALS CONCENTRATION ON HYDROXYAPATITE POWDER CHARACTERISTICS AND SINTERING BEHAVLOR
[Abstract-EN] | [XML]

Volume 2, Number 4 (2005-12)

IN SITU REFRACTORIES USED IN THE CONTAINMENT OF MOLTEN IRON AND STEEL STRATEGIES FOR THEIR DEVELOPMENT
[Abstract-EN] | [XML]
STRENGTH AND FRACTURE TOUGHNESS OF WHISKER REINFORCED DENTAL RESIN-BASED COMPOSITES
[Abstract-EN] | [XML]
SYNTHESIS OF ULTRA-FINE PARTICLES OF BAFE12O19 BY CO- PRECIPITATION ROUTE USING CHLORIDE/NITRATE PRECURSORS
[Abstract-EN] | [XML]
EFFECT OF NOZZLE DIAMETER AND ATOMIZING AIR PRESSURE ON CHARACTERISTICS OF IN-FLIGHT PARTICLES IN WIRE ARC SPRAYING
[Abstract-EN] | [XML]
EFFECT OF COMPOSITION ON PHASE EVOLUTION AND MICROSTRUCTURE OF REACTION BONDED MULLITE (RBM)
[Abstract-EN] | [XML]
ELECTROCHEMICAL NOISE ANALYSIS OF 70-30 BRASS DURING STRESS CORROSION CRACKING TEST IN MATTSON S SOLUTION
[Abstract-EN] | [XML]
NEW METHOD FOR LIFE ASSESSMENT OF 1%CR-0.5% MO LOW ALLOY STEEL ON THE BASE OF GRAIN BOUNDARY CREEP CAVITATIONS
[Abstract-EN] | [XML]
MODELING OF NEW PROCESS IN MIDREX SYNGAS SYSTEM
[Abstract-EN] | [XML]

Volume 2, Number 3 (2005-9)

HYDRATION BEHAVIOUR AND ANTIOXIDISING EFFECT OF ALUMINIUM POWDER ADDED TO OXIDE- AND CARBON-BASED CASTABLES
[Abstract-EN] | [XML]
INVESTIGATING DISPERSION AND RHEOLOGICAL BEHAVIOR OF IONICALLY STABILIZED AQUEOUS A-ALUMINA SUSPENSION
[Abstract-EN] | [XML]
DETERIORATION OF PITTING CORROSION OF 316 STAINLESS STEEL BY SENSITIZATION HEAT TREATMENT
[Abstract-EN] | [XML]
FABRICATION OF CARBON FIBERS FROM COMMERCIAL WET SPIN POLYACRYLONITRILE FIBERS
[Abstract-EN] | [XML]
MODELLING OF THE PERMEABILITY FOR COLUMNAR DENDRITE STRUCTURES DURING SOLIDIFICATION OF MUSHY ALLOYS
[Abstract-EN] | [XML]
THE DEFORMATION BEHAVIOR OF AZ31 MAGNESIUM ALLOY AT ELEVATED TEMPERATURES
[Abstract-EN] | [XML]
TENSILE AND FRACTURE CHARACTERISTICS OF A SIC- PARTICLE-REINFORCED 7075 ALUMINIUM ALLOY
[Abstract-EN] | [XML]

Volume 2, Number 2 (2005-6)

THERMAL SHOCK OF REFRACTORIES
[Abstract-EN] | [XML]
THE EFFECT OF ADDITION OF NAHF2 ON PHYSICOCHEMICAL AND MECHANICAL PROPERTIES OF APATITE CEMENTS
[Abstract-EN] | [XML]
THE COMPARISON OF MECHANICAL PROPERTIES OF SINTERED ?. QUARTZ SOLID SOLUTION AND GAHNITE GLASS – CERAMICS IN ZNO-AL2O3-SIO2 SYSTEM
[Abstract-EN] | [XML]
STUDY OF THE OPTIMUM CALCINATION TEMPERATURE FOR THE SYNTHESIS OF STRONTIUM HEXAFERRITE MAGNETIC CERAMIC NANOPOWDER BY A SOL-GEL AUTO-COMBUSTION METHOD IN THE PRESENCE OF CATIONIC SURFACTANT
[Abstract-EN] | [XML]
AN INVESTIGATION TO BAINITE FORMATION MORPHOLOGIES IN NI-CR BEARING LOW CARBON STEELS THROUGH THERMOMECHANICAL PROCESSING
[Abstract-EN] | [XML]
THE KINETIC OF PRECIPITATION REACTIONS IN A RAPIDLY AGED HIGH ALLOY HIGH STRENGTH STEEL
[Abstract-EN] | [XML]
A STUDY ON SINTERING BEHAVIORS OF COPPER COATED SIC COMPOSITE POWDERS FABRICATED BY ELECTROLESS PLATING AND MECHANICAL PROPERTIES OF THE CONSOLIDATED COMPOSITES
[Abstract-EN] | [XML]

Volume 2, Number 1 (2005-3)

IMPROVED CARBON BONDED MGO MATERIALS AS SMART REFRACTORIES
[Abstract-EN] | [XML]
STUDY OF JOINING MECHANISM (S) IN BRASS/STEEL/BRASS SANDWICH MATERIALS PREPARED BY SCRATCH BRUSHING METHOD
[Abstract-EN] | [XML]
MOLD FILLING BEHAVIOR OF DOUBLE GATING SYSTEM IN ALUMINUMLFC PROCESS
[Abstract-EN] | [XML]
INVESTIGATION INTO SYNERGISTIC EFFECT OF MOLYBDATE AND PHOSPHATE AS AN INHIBITOR FOR MILD STEEL CORROSION PREVENTION IN SIMULATED COOLING WATER
[Abstract-EN] | [XML]
INFLUENCE OF MGO ADDITION ON MICROSTRUCTURE AND PROPERTIES OF REACTION SINTERED ALUMINIUM TITANATE
[Abstract-EN] | [XML]
CATHODIC PROTECTION OF STEEL REINFORCED CONCRETE BY CONDUCTIVE EPOXY PAINTS IN MARINE ENVIRONMENTS
[Abstract-EN] | [XML]
MODELING OF RAPID SOLIDIFICATION PROCESS IN THE GAS ATOMIZATION OF MOLTEN METALS
[Abstract-EN] | [XML]

Volume 1, Number 4 (2004-12)

TRENDS IN THE STEEL INDUSTRY AND DEVELOPMENTS OF NEW REFRACTORY MATERIALS
[Abstract-EN] | [XML]
EFFECT OF FINISH ROLLING TEMPERATURE ON MICROSTRUCTURE,TEXTURE AND PLANAR ANISOTROPY IN ALUMINUM ALLOY AA3004 SHEETS
[Abstract-EN] | [XML]
ENRICHMENT OF A HARD-ROCK GOLD ORE USING FLOTATION AND CYANIDATION
[Abstract-EN] | [XML]
CORROSION BEHAVIOR OF ZINC COATED STEEL REBAR IN HIGH-STRENGTH REINFORCED CONCRETE
[Abstract-EN] | [XML]
AIR PRESSURE SIMULATION IN CASTING MOLDS
[Abstract-EN] | [XML]
TAPE CASTING OF NON-AQUEOUS HYDROXYAPATITE SLIPS
[Abstract-EN] | [XML]

Volume 1, Number 3 (2004-9)

PHOTO AND ELECTROLUMINESCENCE STUDY PHOSPHOR PREPARED BY DIFFERENT METHODS OF ZNS:CU
[Abstract-EN] | [XML]
THEORY, EXPERIMENT AND PRACTICE OF SLAG ATTACK OF REFRACTORIES
[Abstract-EN] | [XML]
THE ROLE OF CARBON IN REFRACTORIES
[Abstract-EN] | [XML]
KINETICS OF CARBOTHERMIC REDUCTION OF AN IRANIAN CELESTITE ORE
[Abstract-EN] | [XML]
EFFECT OF MECHANICAL ACTIVATION ON CARBOTHERMIC SYNTHESIS OF TITANIUM CARBIDE FROM ILMENITE CONCENTRATE
[Abstract-EN] | [XML]
PLASTIC DEFORMATION BEHAVIOUR AT THE WORN SURFACE OF NOVEL CAST AL-ALLOY-TICP COMPOSITE
[Abstract-EN] | [XML]
TEM INVESTIGATION OF RAPIDLY SOLIDIFIED NDFEB HARD MAGNETIC MATERIAL
[Abstract-EN] | [XML]
THE EFFECT OF HOLDING TIME ON TEMPERATURE EUTECTIC UNDERCOOLING IN DUCTLIE IRON
[Abstract-EN] | [XML]

Volume 1, Number 2 (2004-6)

MATHEMATICAL MODELLING OF THE EFFECT OF FOAM DEGRADATION ON MOULD FILLING IN THE GREY IRON EPC PROCESS
[Abstract-EN] | [XML]
PREPARATION OF CATALYTIC COATING OF TITANIUM OXIDE BY MEANS OF ELECTROLYTIC DEPOSITION
[Abstract-EN] | [XML]
IN-SITU FABRICATION PROCESS OF AL- TIC COMPOSITE BY SLAG
[Abstract-EN] | [XML]
FLOW BEHAVIOR OF MOLTEN METAL IN ALUMINUM LFC PROCESS
[Abstract-EN] | [XML]
CALCIUM PHOSPHATE CEMENT: STUDY OF (BETA-TRICALCIUM PHOSPHATE, DICALCIUM PHOSPHATE AND CALCIUM CARBONATE SYSTEM
[Abstract-EN] | [XML]
EFFECTS OF REINFORCEMENT VOLUME FRACTION, REINFORCEMENT SIZE AND SOLUTION HEAT TREATMENT ON THE MICROSTRUCTURE OF THE TWO DIFFERENTLY PROCESSED A35&SICPCOMOSITES
[Abstract-EN] | [XML]
COMPUTER SIMULATION OF FLUID FLOW FILLING DURING MOLD USING FINITE VOLUME METHOD
[Abstract-EN] | [XML]

Volume 1, Number 1 (2004-3)

EFFECTS OF ALUMINIZING PARAMETERS ON THE MICROSTRUCTURE AND THICKNESS OF PT-ALUMINIDE COATING APPLIED ON A NI-BASE SUPERALLOY, GTD-111
[Abstract-EN] | [XML]